The EVL Twin by EVL Vapors is designed to be almost externally indistinguishable from its brother, the Reaper V3, but like most twins, has a different soul inside.
Made from the same 316SS, Ultem, and PEEK that the Reaper V3 is made from, but designed to use Aspire Nautilus Coils!
Extremely simple design for ease-of-use and minimal maintenance. Only 2 o-rings are used throughout the design! The base is the only part which contains multiple components, and these have been press-fit extremely tight, making them non-user serviceable and as such, do not require separation for cleaning!
Tank sections and airflow rings are cross compatible with the Reaper V3, so existing Reaper V3 users can enjoy accessorizing without having to spend more. This also allows new vapers starting on premade tanks to be able to refine their EVL Twin and make the jump to the rebuildable Reaper V3, while being able to enjoy using their Twin-compatible parts.
Customize your Nautilus coil with the included MTL inserts. A 1.0mm diameter and 1.2mm diameter insert is included with the Twin in the bottom of the tin along with the spare o-rings. Swapping these MTL inserts allows users to change the undercoil airflow, allowing for a fully customized airflow setup for the perfect MTL draw. Note: Watch out for the thin coil leg that touches against this pin. When re-inserting the pin, do not crush or push that wire out of the way. Make sure you check the resistance on an ohm reader after installation to ensure you are getting a correct and accurate reading.
NOTE: Images shown with EVL Twin attached to mod with 22<24mm Hexairgon Air Flow Beauty Ring, Titanium 510 Finned Drip Tip, and clear polycarbonate tank are for demonstration purposes only, and only to be used as reference for the customization possibilities of the EVL Twin. This sales listing is only for the base EVL Twin tank, as shown in the other photos not on mod.
NOTE: It is highly recommend that you fully clean out this product before the first time you use it. While the factory does a decent job at removing dust, shavings, machining lubricants and greases, there is still the potential for trace elements to remain, and it is best recommended that you do an additional cleaning to meet your standard of cleanliness.
Vapes by Enushi is not responsible for misuse of product, or dangerously low coil builds. Vapes by Enushi is not liable for the use of improper batteries for your builds.
This product hasn't received any reviews yet. Be the first to review this product!
All prices are in CAD