Accessories

Original Spare Replacement Switch Magnets for Armor Mech by Armor Mods This pair of original direct replacement spare ring magnets for the Armor Mech's firing switch. From Armor Mods. FRAGILE WARNING: Ring...

Large Tank Kit for the EVL Twin by EVL Vapors This Large Tank Kit for the EVL Twin by EVL Vapors allows users to extend liquid capacity from 2mL to 4mL with only a 10mm height increase, for a total height of only 43mm. The...

Decoded Bloop Pod (3 Pack) by STLTH A Kiwi Watermelon taste so sweet, even your tastebuds might not believe it_____ Each pack contains 3 pod cartridges 2.0 mL of E-liquid per cartridge For use only with...

Strawberry Pod (3 Pack) by STLTH Halfway between a cream and strawberry flavor Each pack contains 3 pod cartridges 2.0 mL of E-liquid per cartridge For use only with the >> STLTH BATTERY...

dotAIO Doors, Wave, by dotmod The dotAIO is your canvas. Create a new combo These beautiful designs painted on the dotmod dotAIO doors will provide you with more combinations to spice up your dotAIO. Includes: 1x...

POM Tip for 510 V1 Kayfun 5 / Prime Driptip Base by SvoëMesto The POM Tip for the V1 (Kayfun 5 / Prime Drip Tip Base) or the Prime Special Edition NITE DLC Drip Tip by SvoëMesto is a POM...

NITE DLC Special Edition Tank Extension Kit for the Kayfun Prime RTA by SvoëMesto The Tank Extension Kit for the Kayfun Prime Special Edition RTA by SvoëMesto increases the tank capacity from 2mL to 4.5mL and...

Insulators Kit for Kayfun Prime by SvoëMesto Spare replacement insulators/isolators in a 3-piece kit for the Kayfun Prime by SvoëMesto...

Replacement Spare Parts Kit for Kayfun Mini V3 by SvoëMesto Spare replacement parts kit for the Kayfun Mini V3 by SvoëMesto. Package Includes: All o-rings 2x Build screws 1x Grub screw for...

Replacement Spare Parts Kit for Kayfun 5² (K25) by SvoëMesto Spare replacement parts kit for the Kayfun 5² (K25) by SvoëMesto. Package Includes: All o-rings 2x Build screws...

PEI (Ultem) Tank Kit for the Kayfun 5² (K25) by SvoëMesto The PEI Tank Kit for the Kayfun 5² (K25) by SvoëMesto is a tank upgrade that changes the look and durability level of...

MTL Pin Kit for Kayfun 5 by SvoëMesto This MTL (Mouth-To-Lung) Pin Kit allows users to tighten outlet (coil-side) air flow in their Kayfun 5 RTA by SvoëMesto, for a more refined vaping experience,...

SE Special Edition Nite DLC Extension Tube for Kayfun [Lite] 2019 by SvoëMesto This DLC coated extension tube is compatible with the Kayfun [Lite] Longmode and Dome. Specifically designed for the Kayfun [Lite] SE...

Replacement Pod for Grimm Kit by HellVape Official Replacement Pods by HellVape for the HellVape GRIMM KIT AIO Pod System. Each purchase comes with ONE pod per pack...

The TIP by BB Vapes Brvnd The TIP by BB Vapes Brvnd allows users to easily unscrew their Billet Box 510 adapter with the integrated keyed flange, while also allowing users to change the drip tip material/colour as...

Billet Box 24K Gold Plated Screw Set by BB Vapes Brvnd Replacement 24K gold plated screws for your Billet Box plates. Set Includes: 4x Long screws for firing button plate 3x Short screws for control button...

Cloud 9 Cotton Cloud 9 Cotton is manufactured with perfection and love for vapers who are seeking their "Cloud 9" vaping experience. Cloud 9 Cotton is processed 24 times resulting in a pure fibre cotton delivering the...

DotShell / VapeShell MTL Air Flow Pins Kit by Atmizoo of Atmizone This MTL Air Flow Pins Kit fits the DotShell or the VapeShell by Atmizoo of Atmizone, and allows users to precision tune their airflow settings for...

Replacement Glass for dotTank 24mm 3.5mL by DotMod This replacement 3.5mL glass fits the dotTank 24mm 3.5mL by dotmod. Includes: 1x Replacement Glass 2x...

Replacement Colour Tank for the dotAIO by dotmod Change the look of your dotAIO or customize your style with these Replacement Colour Tanks, available in smoked Black, Gold, Royal Blue, or Red! Made of PCTG...

dotAIO Doors, Leaf, by dotmod The dotAIO is your canvas. Create a new combo These beautiful designs painted on the dotmod dotAIO doors will provide you with more combinations to spice up your dotAIO. Includes: 1x...

Replacement Bomber Pro MOSFET Chip Set Assembly for Malu Mod by Proteus Progeks This is a replacement Bomber Pro MOSFET Chip Set Assembly for the Malu Mod by Proteus Progeks. Already fitted with all wires and connection...

Armor Mods Battery Wraps This 6-pack of Armor Mods battery wraps fits 18650 batteries while showing your support for Armor Mods in these classy silver on black prints! Three print variations are included, with two of each...

Timascus Low Profile Wide Bore Drip Tip for Armor RDA by Form Custom This custom Timascus Low Profile Wide Bore Drip Tip by Form Custom fits the Armor RDA by Armor Mods, 100% machined, finished, and heat-coloured in...

SUPERCONDUCTOR AFC Lock Ring for Armor RDA by Form Custom This custom one-off AFC Lock Ring and Drip Tip combination is made of SUPERCONDUCTOR material by Form Custom, and adds the ultimate aesthetic to your Armor 1.0,...

Mokume-Gane AFC Lock Ring for Armor RDA 1.0 or 2.0 by Form Custom This AFC Lock Ring is made by Form Custom, and adds some beautiful detailing to your Armor 1.0 or 2.0 RDA. 100% machined, finished, etched, and...

Pico- (Minus) MM Drip Tip by JMK Tips The Pico 510 drip tip by JMK Tips provides a comfortable height and outer diameter, with this MM version having a 1/16" inner bore for a tight, focused air flow that produces maximum...

Taifun GT3 Nano Replacement Plexi by SteamTuners Plexi replacement tank for the Taifun GT3 Nano Kit. *Note: The replacement tank does not work without the chamber and the top cap of the Taifun GT3 Nano Kit...

Tripod Top Fill Clear Tank Kit by SteamTuners The Tripod Top Fill Clear Tank Kit by Steam Tuners replaces your Atmizoo Tripod RTA's standard top tank section, and consists of a one-piece tank section and stainless steel top...

Taifun GTR Clear Tank by SteamTuners This Clear Tank by Steam Tuners replaces the frosted PSU tank that normally comes with the Taifun GTR, for a crystal-clear visibility inside or your tank! ***Note: Taifun GTR is...

TRVPPED Ultem Replacement Window for Odis Boxxer V2 RBA by BB Vapes Brvnd This TRVPPED Ultem Replacement Window by BB Vapes Brvnd is for the >> Boxxer V2 RBA by Odis Design <<. Replacing the original glass...

T.R.E.A.M. Control Plate Replacement (Gold or Silver) by BB Vapes Brvnd The T.R.E.A.M. Control Plate Replacement by BB Vapes Brvnd replaces your existing screen / control plate on your Billet Box Rev 4. TRVP Rules...

Boxxer Flow V2 Combo by Odis Design For true Billet Box and Boro Tank enthusiasts, Odis Design presents the best of both worlds with a combo package! Get the Boxxer V2 for impressive airflow and flavour, and the Flow...

Boxxer V2 by Odis Design The Boxxer V2 by Odis Design is a revolutionary high-powered, big-air flow rebuildable tank atomizer design for the Billet Box and other devices that normally accept the BBV Boro Tank. By combining...

Spare Replacement Parts Set Kit for SQuape N[duro] RTA by StattQualm This replacement Spare Parts Set by StattQualm is a kit of extra o-rings and screws for your SQuape N[duro] RTA. O-rings: 1x ø 19x1...

Cap for SQuape S[even] by StattQualm This Cap is for the SQuape S[even] by StattQualm. With these Caps, you can change your SQuape S[even] to a different look. The advantage of Ultem Caps is that they have high heat...

Top Cap Slam Tip for SQuape S[even] by StattQualm The Top Cap Slam Tip for the SQuape S[even] by StattQualm allows for an extremely comfortable fit and feel due to its added eronomics. This mouthpiece also replaces the Top...

Spare V2T MOSFET for Stratum Zero by OLC Vape Replacement / spare MOSFET V2T for Stratum 0 (Zero), made by OLC Vape in Russia. These units used in test devices. 100% function and quality, but may show a score mark on the...

Boro Tank Window Replacement by BB Vapes Brvnd This stainless steel window replacement changes up the look of your Boro Tank dramatically. "Silver" version is just a raw uncoated stainless steel. "24K Gold" version...

Reversible Condensation Plug (Gold or Silver) by BB Vapes Brvnd The Reversible Condensation Plug is designed to attach to Boro Tanks (by Billet Box) to direct vapour and condensation out the air path only, and minimizes...

Nautilus Coil AFC Ring This Nautilus Coil AFC Ring is a simple attachment that connects to the bottom positive post of the Aspire Nautilus coil to allow for greater adjustability of air flow, allowing users to perfectly...

Trickster Bottom Ring for Apex RDA by Vicious Ant The Trickster Bottom Ring for the >> Apex RDA by Vicious Ant << changes the look of your setup by replacing the original air flow control ring...

Grail Bottom Ring for Apex RDA by Vicious Ant The Grail Bottom Ring for the >> Apex RDA by Vicious Ant << changes the look of your setup by replacing the original air flow control ring...

Distortion Bottom Ring for Apex RDA by Vicious Ant The Distortion Bottom Ring for the >> Apex RDA by Vicious Ant << changes the look of your setup by replacing the original air flow control ring...

Specter Bottom Ring for Apex RDA by Vicious Ant The Specter Bottom Ring for the >> Apex RDA by Vicious Ant << changes the look of your setup by replacing the original air flow control ring...

Chronos Bottom Ring for Apex RDA by Vicious Ant The Chronos Bottom Ring for the >> Apex RDA by Vicious Ant << changes the look of your setup by replacing the original air flow control ring...

Aegean Bottom Ring for Apex RDA by Vicious Ant The Aegean Bottom Ring for the >> Apex RDA by Vicious Ant << changes the look of your setup by replacing the original air flow control ring...

Saturn Top Ring for Apex RDA by Vicious Ant The Saturn Top Ring for the >> Apex RDA by Vicious Ant << changes the look of your setup. Dimensions: Diameter: 22mm Height: 4mm View the entire list of...

Hazard Top Ring for Apex RDA by Vicious Ant The Hazard Top Ring for the >> Apex RDA by Vicious Ant << changes the look of your setup. Dimensions: Diameter: 22mm Height: 7mm View the entire list...

Bastille Top Ring for Apex RDA by Vicious Ant The Bastille Top Ring for the >> Apex RDA by Vicious Ant << changes the look of your setup. Dimensions: Diameter: 22mm Height: 4mm View the entire list...