Replacement Parts

1.5x3.5mm Dual Slot Eris Hybrid Airflow Insert, by Vicious Ant This optionally purchased air flow insert for the >>Eris Hybrid Delrin<< or >>Eris Hybrid Ti<< mods allows users to set up their device...

Dani Extreme TITANIUM Extension Cap by dicodes The Dani Extreme 1L and 2L TITANIUM Extension Cap by dicodes of Germany is for all Dani Extreme V3, V2+ or V2 mods, but is best fit for the dicodes Dani Extreme V3 - 22mm...

A1 22mm 510 Base Replacement Spare Part for Kayfun [Lite] 2019 by SvoëMesto Spare replacement 22mm 510 Connector Base for the Kayfun Lite 2019 by SvoëMesto. Includes main circumference o-ring. No other...

1x1mm Eris Hybrid Airflow Insert, by Vicious Ant This optionally purchased air flow insert for the >>Eris Hybrid Delrin<< or >>Eris Hybrid Ti<< mods allows users to set up their device for a 1x1mm...

Eris Hybrid Spare PMMA Tank, by Vicious Ant This spare PMMA (acrylic) tank section is for the >>Eris Hybrid Delrin<< or >>Eris Hybrid Ti<< mods. WARNING: It is highly recommend that you fully...

Dani 32.5 to 30mm Reduction Cone by dicodes This 30mm reduction cone is a beauty ring that allow you to step down from the 32.5mm outer diameter of the >> Dani 32.5 Tube Mod << for a more flush look with your...

Translucent Blue MTL Air Flow Door & Button Plate Set for Delro MTL door and faceplate panel set for the Delro d60 or d40, featuring two 1.0mm air intake holes for a precision mouth-to-lung vaping experience. Fits the...

Smokey Haze MTL Air Flow Door & Button Plate Set for Delro MTL door and faceplate panel set for the Delro d60 or d40, featuring two 1.0mm air intake holes for a precision mouth-to-lung vaping experience. Fits the d60e...

Clearly Orange MTL Air Flow Door & Button Plate Set for Delro MTL door and faceplate panel set for the Delro d60 or d40, featuring two 1.0mm air intake holes for a precision mouth-to-lung vaping experience. Fits the...

Clearly Blue MTL Air Flow Door & Button Plate Set for Delro MTL door and faceplate panel set for the Delro d60 or d40, featuring two 1.0mm air intake holes for a precision mouth-to-lung vaping experience. Fits the d60e...

Tangerine Dream 2-Slot Air Flow Door & Button Plate Set for Delro New 2-Slot Air Flow door with matching button plate set for the Delro d60 or d40, featuring two large air intake slots to make it fully...

delro Replacement Li-Po Battery for d60 and d40 Spare replacement lithium-polymer battery pack for the delro d60 and d40. UNITED STATES CUSTOMERS: If you are not purchasing these with a device, these CAN NOT be shipped to...

The Infinix Pod 2mL Cartridge 3/PK by Smok

Replacement Large Monochrome Screen for DNA60, DNA75, DNA200 and DNA250, by Evolv Replacement large monochrome screen for the DNA 60, DNA 75, DNA 200, and DNA 250 chip sets, made by Evolv. Direct OEM replacement for...

1.5mm Diameter MTL Positive Pole for the GTR by Taifun For users looking to get a fixed 1.5mm diameter air hole directly under the coil of their Taifun GTR for a MTL hit, this optional 1.5mm diameter Positive Pole will...

Air Flow Control Ring for Taifun GT IV This is simply a replacement Air Flow Control Ring part for your Taifun GT IV in the original silver stainless steel finish...

Replacement Top Cap for Taifun GT IV This is simply a replacement Top Cap part for your Taifun GT IV in the original silver stainless steel finish...

MTL Pro Upgrade Pin for Kayfun Lite [Plus] 2021 Aerokon System by SvoëMesto For vapers who prefer MTL+ style of vaping with very tight draws of 1.2mm or less and want to squeeze every last bit of ultra fine-tuned...

Scylla Spare 2mL Tank Assembly by Vicious Ant This spare Mini 2mL Tank Assembly for the Scylla RTA by Vicious Ant allows you to either carry a pre-filled tank with you for quick swapping while on-the-go, servicing your...

Scylla Ultem Bell Cap Kit by Vicious Ant This Ultem PMMA Bell Cap Set for the Scylla RTA by Vicious Ant changes up the look of your Scylla RTA for a super clean looking setup while making it a little bit easier to clean as...

Replacement 510 Base / Deck for Taifun GT IV This is a replacement 510 Base / Deck for the >>Taifun GT IV<<, in the standard silver stainless steel finish. Does NOT include the positive pole, screws,...

Toxic MTL Air Flow Door & Button Plate Set for Delro MTL door and faceplate panel set for the Delro d60 or d40, featuring two 1.0mm air intake holes for a precision mouth-to-lung vaping experience. Fits the d60e (Evolv...

Scarlet Haze MTL Air Flow Door & Button Plate Set for Delro MTL door and faceplate panel set for the Delro d60 or d40, featuring two 1.0mm air intake holes for a precision mouth-to-lung vaping experience. Fits the d60e...

Electric Yellow MTL Air Flow Door & Button Plate Set for Delro MTL door and faceplate panel set for the Delro d60 or d40, featuring two 1.0mm air intake holes for a precision mouth-to-lung vaping experience. Fits the...

Wintergreen 2-Slot Air Flow Door & Button Plate Set for Delro New 2-Slot Air Flow door with matching button plate set for the Delro d60 or d40, featuring two large air intake slots to make it fully...

Scarlet Haze 2-Slot Air Flow Door & Button Plate Set for Delro New 2-Slot Air Flow door with matching button plate set for the Delro d60 or d40, featuring two large air intake slots to make it fully...

Dani SBS SS Reduction Cones by dicodes These Dani SBS Reduction Cones by dicodes are stainless steel beauty rings that allow you to step down from the 25mm outer diameter of the >> dicodes Dani SBS Box Mod <<...

Jade 2-Slot Air Flow Door & Button Plate Set for Delro New 2-Slot Air Flow door with matching button plate set for the Delro d60 or d40, featuring two large air intake slots to make it fully...

Electric Yellow 2-Slot Air Flow Door & Button Plate Set for Delro New 2-Slot Air Flow door with matching button plate set for the Delro d60 or d40, featuring two large air intake slots to make it fully...

Clearly Orange 2-Slot Air Flow Door & Button Plate Set for Delro New 2-Slot Air Flow door with matching button plate set for the Delro d60 or d40, featuring two large air intake slots to make it fully...

Spare Replacement Pole Isolator for the VapeShell by Atmizoo of Atmizone Replacement spare positive pole isolator / insulator for the VapeShell by Atmizoo. Locates within the 510 connection point to isolate the 510...

Blasted Storm 2019 Tank Shield Cover for Taifun GT IV This replacement "Blasted Storm 2019" Tank Shield covers the glass tank of your Taifun GT IV, and acts as either a replacement part or to change up the look of your tank...

Replacement Spare Center Pin for Kayfun Mini V3 by SvoëMesto Spare replacement center pin for the Kayfun Mini V3 by SvoëMesto...

510 Adapter Connector For Origin X by OXVA This 510 Adapter Connector by OXVA allows you to convert your Origin X in to a standard 510 connection mod, to use any other atomizer on the mod...

The Nautilus Prime Empty Pod 1/PK By Aspire spire Nautilus Prime Pod Cartridge is suitable for Aspire Nautilus Prime Pod Mod Kit. Equipped with 3.4ml vape juice capacity, the Nautilus Prime Pod Cartridge can be used...

Clear MTL Air Flow Door & Button Plate Set for Delro MTL door and faceplate panel set for the Delro d60 or d40, featuring two 1.0mm air intake holes for a precision mouth-to-lung vaping experience. Fits the d60e (Evolv...

Spare Replacement Positive Post Insulator for the DotShell by Atmizoo of Atmizone Replacement spare positive post insulator made of PEEK DotShell by Atmizoo of Atmizone...

Clear Polished Skeleton Button for Delro d60d This Skeleton Button assembly replaces the buttons on your Delro d60d, allowing you to change the look to match your personal style. This NEW Skeleton Button version features...

Tripod Chimney Extension Tubes Kit by Atmizoo of Atmizone This Chimney Extension Tubes Kit extends the chimney of your Tripod RTA by Atmizoo of Atmizone, from 2.0 mL to 3.4 mL of liquid capacity using the Tripod 3.4 mL Tank...

Tripod Spare Replacement Positive Post Insulator by Atmizoo of Atmizone Replacement spare positive post insulator for the Tripod RTA by Atmizoo. Made of PEEK. For more information about the Tripod Tank Body and other...

Replacement Spare AFC Ball Bearing Detent Module for the Taifun GTR This ball bearing detent module (Kugeldruckstück) for the air flow control (AFC) ring is a direct replacement spare part for the Taifun GTR...

Replacement Button Set for Delro d60e This fire and adjustment button set replaces the buttons on your Delro d60e, allowing you to change the look to match your personal style. Fits the d60e (Evolv DNA60) only. Will not...

Black DLC Storm 2019 Tank Shield Cover for Taifun GT IV This replacement "Storm 2019" Tank Shield covers the glass tank of your Taifun GT IV, and acts as either a replacement part or to change up the look of your tank with...

Black DLC Top Cap for Taifun GT IV This replacement Top Cap for your Taifun GT IV is finished in a black DLC coating, for a rich lustrous look while having exceptional surface hardness for enhanced wear resistance and...

Black DLC Air Flow Control Ring for Taifun GT IV This replacement AFC (Air Flow Control) Ring for your Taifun GT IV is finished in a black DLC coating, for a rich lustrous look while having exceptional surface hardness for...

Tank Cover / Shield "Riffle" for the Taifun GT III (GT3) "Riffle" tank cover/shield for the glass tank on the Taifun GT3. Contents: 1x "Riffle" stainless steel tank cover shield 1x O-ring, 19x1mm (for installation...

1.0mm Diameter Single Hole MTL Positive Pole for the GTR by Taifun For MTL purists looking to get even tighter direct air out of the Taifun GTR for the perfect mouth-to-lung (MTL) draw, this optional 1.0mm diameter Single...

2.0mm + 1.0mm Diameter DL Positive Pole for the GTR by Taifun For users looking to get even more air out of the Taifun GTR for a restricted DL hit, this optional 2.0mm + 1.0mm diameter Positive Pole (PlusPol) will do the...

Black DLC 3mL XS PSU Tank Conversion Kit for the GT IV (GT4) by Taifun Replacement tank arrangement for the Taifun GT4 DLC RTA, allowing for a shorter height and lighter weight through the use of PSU - Polysulfone. This is...

Open Draw Positive Pole (PlusPol) for Taifun GT IV (GT4) and GT IV S (GT4S) The Open Draw Positive Pole for the Taifun GT IV opens up a bit more air flow from the exit port of the positive pole to an airy 2 x 6.5mm air...