Miscellaneous

Polished Gold Small 1.2x1.2mm Air Flow Insert for Engine RDA by Armor Mods This polished gold plated "Small" air flow insert for the Engine RDA by Armor Mods features dual 1.2x1.2mm air intake tubes, which effectively cuts...

Satin Black DLC Top Cap Set for Engine RDA by Armor Mods This original top cap set for the Armor Engine RDA is media-blasted then coated in black DLC for a matte satin black setup. DLC stands for Diamond-Like Carbon,...

Original Spare Replacement Switch Magnets for Armor Mech by Armor Mods This pair of original direct replacement spare ring magnets for the Armor Mech's firing switch. From Armor Mods. FRAGILE WARNING: Ring...

10-pack of 18650 Battery Wraps by dotmod These 18650 cell battery wraps by dotmod have the gold "dotmod" logo, and allows users to replace torn wrappers or customize their existing batteries for a fully matched dotmod...

PEI (Ultem) Tank Kit for the Kayfun 5² (K25) by SvoëMesto The PEI Tank Kit for the Kayfun 5² (K25) by SvoëMesto is a tank upgrade that changes the look and durability level of...

Spare V3 BLACK MOSFET for Stratum Zero by OLC Vape Replacement / spare MOSFET V3 BLACK for Stratum 0 (Zero), made by OLC Vape in Russia. The OLC MOSFET V3 features dual military-grade MOSFET chips and a side mounted switch...

DotShell / VapeShell MTL Air Flow Pins Kit by Atmizoo of Atmizone This MTL Air Flow Pins Kit fits the DotShell or the VapeShell by Atmizoo of Atmizone, and allows users to precision tune their airflow settings for...

Replacement Bomber Pro MOSFET Chip Set Assembly for Malu Mod by Proteus Progeks This is a replacement Bomber Pro MOSFET Chip Set Assembly for the Malu Mod by Proteus Progeks. Already fitted with all wires and connection...

Armor Mods Battery Wraps This 6-pack of Armor Mods battery wraps fits 18650 batteries while showing your support for Armor Mods in these classy silver on black prints! Three print variations are included, with two of each...

SUPERCONDUCTOR AFC Lock Ring for Armor RDA by Form Custom This custom one-off AFC Lock Ring and Drip Tip combination is made of SUPERCONDUCTOR material by Form Custom, and adds the ultimate aesthetic to your Armor 1.0,...

Mokume-Gane AFC Lock Ring for Armor RDA 1.0 or 2.0 by Form Custom This AFC Lock Ring is made by Form Custom, and adds some beautiful detailing to your Armor 1.0 or 2.0 RDA. 100% machined, finished, etched, and...

Taifun GT3 Nano Replacement Plexi by SteamTuners Plexi replacement tank for the Taifun GT3 Nano Kit. *Note: The replacement tank does not work without the chamber and the top cap of the Taifun GT3 Nano Kit...

Tripod Top Fill Clear Tank Kit by SteamTuners The Tripod Top Fill Clear Tank Kit by Steam Tuners replaces your Atmizoo Tripod RTA's standard top tank section, and consists of a one-piece tank section and stainless steel top...

Taifun GTR Clear Tank by SteamTuners This Clear Tank by Steam Tuners replaces the frosted PSU tank that normally comes with the Taifun GTR, for a crystal-clear visibility inside or your tank! ***Note: Taifun GTR is...

Mechanical Conversion Kit for Malu Mod by Proteus Progeks The Malu Mech Conversion Kit by Proteus Progeks allows Malu owners to get the highest amount of power out of their Malu Mod by eliminating the Bomber Pro MOSFET chip...

Warhead Bottom Ring for Apex RDA by Vicious Ant The Warhead Bottom Ring for the >> Apex RDA by Vicious Ant << changes the look of your setup by replacing the original air flow control ring...

Hubris Bottom Ring for Apex RDA by Vicious Ant The Hubris Bottom Ring for the >> Apex RDA by Vicious Ant << changes the look of your setup by replacing the original air flow control ring...

Elysium Bottom Ring for Apex RDA by Vicious Ant The Elysium Bottom Ring for the >> Apex RDA by Vicious Ant << changes the look of your setup by replacing the original air flow control ring...

Amphora Bottom Ring for Apex RDA by Vicious Ant The Amphora Bottom Ring for the >> Apex RDA by Vicious Ant << changes the look of your setup by replacing the original air flow control ring...

Logos Bottom Ring for Apex RDA by Vicious Ant The Logos Bottom Ring for the >> Apex RDA by Vicious Ant << changes the look of your setup by replacing the original air flow control ring...

Chimera Bottom Ring for Apex RDA by Vicious Ant The Chimera Bottom Ring for the >> Apex RDA by Vicious Ant << changes the look of your setup by replacing the original air flow control ring...

Siren Top Ring for Apex RDA by Vicious Ant The Siren Top Ring for the >> Apex RDA by Vicious Ant << changes the look of your setup. Dimensions: Diameter: 22mm Height: 6.5mm View the entire list of...

Remington Top Ring for Apex RDA by Vicious Ant The Remington Top Ring for the >> Apex RDA by Vicious Ant << changes the look of your setup. Dimensions: Diameter: 22mm Height: 6.5mm View the entire...

Excelsior Top Ring for Apex RDA by Vicious Ant The Excelsior Top Ring for the >> Apex RDA by Vicious Ant << changes the look of your setup. Dimensions: Diameter: 22mm Height: 6.5mm View the...

Atlantean Top Ring for Apex RDA by Vicious Ant The Atlantean Top Ring for the >> Apex RDA by Vicious Ant << changes the look of your setup. Dimensions: Diameter: 22mm Height: 6.5mm View the entire...

Palladium Top Ring for Apex RDA by Vicious Ant The Palladium Top Ring for the >> Apex RDA by Vicious Ant << changes the look of your setup. Dimensions: Diameter: 22mm Height: 6.5mm View the entire...

Alpha Top Ring for Apex RDA by Vicious Ant The Alpha Top Ring for the >> Apex RDA by Vicious Ant << changes the look of your setup. Dimensions: Diameter: 22mm Height: 6.5mm View the entire list of...

Reaper V3 3mL Midi Tank Kit by EVL Vapors The Reaper V3 3mL Midi Tank Kit allows the Reaper V3 to gain an even better fit in your favourite side-by-side or "cage" mod, or allows those that want a little more capacity than...

Reaper V3 2mL Micro Tank Kit by EVL Vapors The Reaper V3 2mL Micro Tank Kit allows you to make your Reaper V3 even smaller than original while maintaining a 2mL liquid capacity! This little tank reduces the height of the...

Reaper V3Ti Conversion Kit, Titanium 2.7mm DL by EVL Vapors The Titanium 2.7mm Conversion Kit allows for a quick and simple conversion of the Reaper V3Ti from the MTL 1.8mm max airflow up to a less restricted 2.7mm for...

Reaper V3Ti 5mL Extended Titanium Chimney & PC Tank Kit by EVL Vapors The Reaper V3Ti 5mL Extended Titanium Chimney & Polycarbonate (PC) Tank Kit is a larger tank upgrade to increase the Reaper V3 from the standard...

PEI (Ultem) Tank Kit for the Kayfun 5 (K5) by SvoëMesto The PEI Tank Kit for the Kayfun 5 is a tank upgrade that changes the look and durability level of the Kayfun 5. A viewing gap on the bottom side of the tank...

The Kayfun 5² (K25) 25mm Nano Kit Nano Kit by SteamTuners The Kayfun 5² (K25) 25mm Nano Kit by Steam Tuners consists of a new chamber, a tank and a top cap. It reduces the atomizer's total...

23mm Reduction Cone for Skarabäus (Scarab) Pro Max by Taifun Reduction cone to reduce the top cap diameter from 25mm down to 23mm for a flush fit with 23mm atomizers. For use with the following mods: >>...

Ultem Replacement Tank for 22mm Top Fill Kit SvoëMesto Kayfun [Lite] 2019 by SteamTuners This Ultem replacement tank for the 22mm Kayfun [Lite] Top Fill Kit by Steam Tuners adds greater chemical resistance,...

Top Fill Kit for 24mm SvoëMesto Kayfun [Lite] 2019 by SteamTuners This Top Fill Kit by Steam Tuners is for the Kayfun [Lite] 2019 RTA by SvoëMesto allows the user to refill from the top without having to unscrew...

Reaper V3 / Twin Tank Section, 2mL, Polycarbonate by EVL Vapors This is a replacement 2mL Polycarbonate Tank Section for the Reaper V3  or Twin by EVL Vapors, made of polycarbonate for maximum optical clarity...

Project X Extension Tank, Black & Gold by Hussar Vapes The Project X Extension Tank allows users to get additional liquid capacity for their Project X RTA while maintaining top fill ability and liquid flow control...

Project X Extension Tank, Polished SS by Hussar Vapes The Project X Extension Tank allows users to get additional liquid capacity for their Project X RTA while maintaining top fill ability and liquid flow control. Included...

Reaper V3 / Twin Tank Section, 5mL, Polycarbonate by EVL Vapors This is a replacement 5mL Extended Tank Section for the Reaper V3 or Twin by EVL Vapors, made of polycarbonate for maximum optical clarity. NOTE: Must be...

Reaper V3 / Twin Tank Section, 2mL, Ultem by EVL Vapors This is a replacement 2mL Ultem Short Tank Section for the Reaper V3 or Twin by EVL Vapors. NOTE: It is highly recommend that you fully clean out this product...

Reaper V3 Spare Parts Kit by EVL Vapors This Spare Parts Pack/Kit for the Reaper V3 by EVL Vapors includes one of each o-ring and two post screws to refresh your Reaper V3.

Carbon Fiber Brass Tube for SVA-X and KimBerly by SVA Mod Brass battery tube with carbon fiber sleeve made by SVA Mod to fit the SVA-X and the KimBerly Mods. Brass conducts electrical current better than the original...

Stainless Steel Billet Box Parts (Limited Edition) by BB Vapes Brvnd Replace your control panel plate, button plate, and button, with this stainless steel set to change the look of your Billet Box. Stainless steel...

Reaper V3 Conversion Kit, MTL by EVL Vapors The MTL Conversion allows for a quick and simple conversion of the Reaper V3 from the standard 2.7mm max airflow down to a much more restricted 1.0mm, 1.2mm, or 1.8mm that...

Reaper V3 5mL Extended Chimney & Ultem Tank Kit by EVL Vapors The Reaper V3 5mL Extended Chimney & Ultem Tank Kit is a larger tank upgrade to increase the Reaper V3 from the standard 2mL size to a larger 5mL...

Blue Snake Juma Body Upgrade for the Malu Mod by Proteus Progeks This Blue Snake Juma body upgrade is for the Malu mod by Proteus Progeks, and allows you to change the look of your mod dramatically. Easy to install, this...

White Delrin Body Upgrade for the Malu Mod by Proteus Progeks This White Delrin body upgrade is for the Malu mod by Proteus Progeks, and allows you to change the look of your mod dramatically. Easy to install, this body is...

AFC Lock Ring Style 2 for Armor RDA 1.0 or 2.0 by Miro Momo Candy These beautifully crafted AFC Lock Rings fit the Armor RDA 1.0 or 2.0, and changes the profile of your Armor RDA for a unique look. Available in a...