Boropad by Velvet Vape

The Boropad by Velvet Vape is the most advanced condensation plug available for Boro Tanks by Billet Box Vapor, with functions to drastically minimize any condensation escaping in to your device, along with air flow control functionality.

A custom fabricated food grade silicon plug provides the best air seal possible, to completely isolate air path directly from the outside of your Boro mod, directly to the intake in your coil/bridge/RBA, with no opportunity for condensation to escape. Further, any condensation built up within this sealed path, is further absorbed by washable absorbent pads that are integrated in to this silicon plug. This absorbent pad is a semi-synthetic fabric and custom made, allowing for a few washes till it needs to be replaced once it has lost absorption ability.

>> Spare Boropad Absorbent Pads can be purchased HERE. <<

Air flow is controlled via small plastic inserts that are convenient placed in to the plug, dialing in your airflow the most accurate way possible. In this standard version of the Boropad, you can swap among four different inserts that range from a loose MTL (tight restricted DL), to full open for DL vaping, with air flow surface equal to hole diameters of 2.0mm, 2.5mm, 3.0mm, and 3.5mm, with likewise guide numbers engraved on the top side of the insert.

If you are looking for tighter airflow for a proper MTL vaping experience, then look at the >> Boropad MTL <<.

The Boropad is compatible with the Billet Box and any other Boro-compatible AIO device with similar side-airflow intakes.

Note: Will NOT function for devices that draw air from the front of the device, such as delro.

Implemented by Atmizone on behalf of Velvet Vape.

Features:

• Custom food grade silicon plug to ensure proper sealing and fitment
• Custom highly absorbent pads to minimize any condensation
• Plastic airflow inserts to fine tune your air flow control
• Boro Tank compatibility
• Suitable for many vaping styles

Package Contents:

• 1x Boropad food grade silicon plug
• 4x Plastic inserts with rectangular air flow opening, equivalent to single air hole diameters of 2.0mm, 2.5mm, 3.0mm, and 3.5mm
• 10x Highly absorbent semi-synthetic fabric pads