The EVM is an extremely well built, light weight, and well designed bottom feed mod by Estoque Mods, featuring an original ES design RTS1.0 iVibe Dual MOSFET with haptic feedback via vibration to notify users of low battery issues and lock/unlock status.
A single 10 mL White SQ Bottle is included with this unit, but additional bottles in different colours can be purchased << HERE >>.
A light weight aluminum sleeve houses the internal components which consists of an integrated battery sled and connector system that contains the MOSFET board. This internal housing is made of light weight but durable and rigid plastic made of a blend of polycarbonate and ABS.
Silver plated electrical wiring contacts and gold plated copper battery contacts ensures solid performance, and capable of delivering the power needed for this RTS 1.0 iVibe Dual MOSFET.
Note: Due to length and gauge of the positive battery contact lead, the EVM experiences a bit more voltage drop compared to comparable mods. Please be aware of this and build accordingly for the limitations of this mod.
Powered by a single 18650 high drain IMR battery, the RTS 1.0 iVibe Dual MOSFET featured in this mod offers a full suite of safety and status indicators to the user.
Press power button 3 times consecutively within 2 seconds to lock/unlock. Vibrates once to indicate lock. Vibrates twice to indicate unlock.
Usage Note: To avoid damaging the bottom of your SQ Bottle, please ensure you connect it to the mod by holding on to the top section of the bottle only. If you push the bottle up from the bottom, against the stainless steel feeder tube, you risk puncturing the bottom of the bottle.
Usage Note: When inserting the battery sled back in to the mod sleeve, ensure you guide the silicone bottle in place, as the bottom edge of the bottle may get caught on the lower edge of the squonk window. This is more likely to occur when the bottle is filled with liquid.
Usage Note: Pay notice to the green silicone o-ring at the bottom of the mod sleeve when you have removed the internal components of the mod. While this o-ring stays reasonably secure in place, there is the possibility of it falling out if the shell is jarred or struck. The mod will still function fine without this o-ring if you happen to lose it, but be aware that the sleeve and the internal components may have a slightly looser fitment as a result. To maintain a rattle-free assembly, try and keep this o-ring in place at all times.
DISCLAIMER: Rebuildable atomizers and mechanical mods are for experienced vapers with access to meters and a working knowledge of Ohms Law, Watts Law, battery safety, and how general electricity works. Please ensure care is taken as to not cause damage nor harm to the atomizer, your battery, the vaping device, yourself, others, or personal property.
Vapes by Enushi is not responsible for misuse of product, or dangerously low coil builds. Vapes by Enushi is not liable for the use of improper batteries for your builds.
Posted by James on 2019 Feb 20th
Got my EVM and have not put it down :)
clean lines huge juice capacity and seriously innovative haptic chip make this a perfect daily carry. I would very highly recommend this mech to anyone looking for a great high end mech mode.
Posted by firstname.lastname@example.org on 2019 Feb 16th
Great mod. Superb finishes, quick mosfet responsable.
The only con could be closing the device after changing battery or filling the bottle, not as smooth as I expected.
Size, weight and haptics are awesome.
All prices are in CAD