Dani 32.5 by dicodes

The Dani 32.5 by dicodes of Germany, is a BEAST of a powerful 80 watt, 32.5mm outer diameter temperature controlled regulated tube mod, with clean lines and elegant looks, delivering a high quality, smooth, and flavorful vaping experience.

Powered by a single 20700 or 21700 battery, the latest in battery technology. It features new electronics that include updated firmware that now includes SS316L as a standard option, along with a wider range of wire coefficients ranging from 50-650. Other new features include a battery cap with a multi-contact copper-beryllium spring that provides 8 contacts to the battery and 16 contacts to the tube for maximum power, a spring loaded 510 connection so your atomizer will sit flush when mounted, and a REVERSE THREADED removable top cap ring that can be replaced with an optionally purchased smaller >> 30mm Reduction Cone for Dani 32.5 << to mate perfectly with your 30mm atomizer.

Best recommended for use with the >> SAMSUNG INR21700 BATTERY CELLS <<.

The Dani 32.5 offers 5 different modes, 10 power boost modes and 10 heater protection modes, allowing the user to switch between variable wattage, variable wattage with heat protection, variable wattage with power boost, variable temperature (various wire types supported), and a bypass mode which turns the device into an unregulated protected mod.

This single button device has a new unique simple to use menu structure. *Please take time to read and understand the short manual included with the device, we also recommend downloading the "full detailed" manual for complete instructions and features explanation. (See the pdf attachment below for the full manual.)

The dicodes Dani 32.5 is precision machined in Germany and backed by a two year warranty on the electronics

dicodes, there is no substitute! Why settle for anything less!

Features

• Stainless steel body with custom tactile button and laser engraved logo
• 80 Watts of power / Variable 5-80W with one Li-Ion battery
• Mechanical MOD mode (electronically overload protected)
• 10 Power boost modes
• 10 Heater protection modes
• Atomizer resistance range 0.05 to 5 Ohms, total range
• Atomizer resistance range for 80W: 0.18-1.5 Ohms
• 3235mm diameter
• Adjustable spring loaded high force 510-thread center pin made of CuBe (Copper Beryllium)
• Ultra-low resistance CuBe-Spring for contacting the battery
• OLED display with high brightness adjustable settings
• Scrolling single button menu
• Powered by 21700 or 20700 batteries
• Up to 12V output voltage 
• Up to 22A output current
• Temperature control mode
• Power boost mode
• Heat protection mode
• Bypass mode (protected but unregulated)
• Reverse battery protection
• Short circuit protection
• Adjustable battery discharge level 2.5-3V
• Versatile easy to use menu structure
• Individual user preferences selection
• Reduction-Cone to 30mm (available separately)
• Temperature controlled vaping mode with various wire-types, (dicodes NiFe30, Titanium, Ni200, Tungsten, or customize your own)
• 2 year warranty
• Made in Germany

Contents

• Dicodes Dani 32.5 Tube Mod
• Short user guide
• Sample pack of dicodes NiFe wire
• Packaged in custom carrying pouch

Dimensions (approx)

• Diameter: 25mm
• Length: 112mm
• Weight: 158 grams

Detailed Instruction Manual

• dicodes Dani 25 Manual
• Support, discussion and tips:  dicodes Facebook group.

*Warranty Terms
Two year warranty covers manufacturing faults within the electronic component of the device only. Opening the device, other than the battery cap to change the battery, will void the warranty.

Please Note:  In order for the temperature control settings to function, a coil made from NiFe30, Titanium, Ni200, Tungsten, SS316, or adjustable ("other“) wire must be used, no exceptions. Coils made with Standard Nichrome or Kanthal A1 wire will only support wattage mode, so the temperature control feature cannot be utilized.