Ultem Micro Chamber for the Pico RTA by YellowKiss (The Vape)

The Pico Ultem Micro Chamber by YellowKiss (The Vape) is an upgrade component that replaces the regular chamber, and removes all of the dead space in the chamber for added flavour compression! If you want the best flavour possible out of the Pico, the Micro Chamber is a much needed upgrade component!

Caution: The Ultem Micro Chamber WILL melt if you dry fire your coil in it!

Caution: Ultem is not as heat resistant as PEEK, and can melt if excessive heat is applied to it for a prolonged period of time.

Caution: Because the Micro Chamber is so close to the coil, it is not recommended to dry burn your coil at high wattage for prolonged periods of time in the micro chamber. It is recommended to do all dry burning in the standard PEEK chamber, then switch to the Micro Chamber once the coil is broken in.

Full Pico List:

(click item name to see product page)

• Pico RTA - The basic kit for the Pico rebuildable Tank Atomizer
• PMMA Drip Tip - Acrylic drip tip, made by YellowKiss. Standard 510 connection. Clear white finish, just like the standard PMMA tank.
• PMMA Tank - Replacement acrylic tank. Replaces the standard tank in case of damage or wear.
• PEEK Micro Chamber - For increased flavour compression.
• Ultem Micro Chamber - For increased flavour compression, replacing the regular chamber, but made of Ultem.
• Ultem Regular Chamber - Replacement part, made of Ultem.
• Ultem Chimney - Replacement part, made of Ultem.
• Ultem Tank - Replacement part, made of Ultem.
• CLR Gender - A conversion adaptor to allow users to replace the standard build deck, and allows users to use the Joyetech eGo One CLR coil (REBUILDABLE VERSION). Using the eGo One CLR coil allows for slightly increased juice capacity (3.5 ml total), plus a full stainless steel internal look, and increased air flow (if using the 0.5 Ohm CLR coil). Treat as either a disposable coil system, or as a rebuildable.

Ultem is a name brand form of PEI (polyetherimide) resin, which is a high performance thermoplastic that is stiffer than PEEK, with a unique translucent yellow colour.

WARNING: It is highly recommend that you fully clean out this product before the first time you use it. While the factory does a decent job at removing dust, shavings, machining lubricants and greases, there is still the potential for trace elements to remain, and it is best recommended that you do an additional cleaning to meet your standard of cleanliness.