Loading... Please wait...


Vaponaute - "L'Hypersonic" BF RDTA

Hover over image to zoom

  • Vaponaute - "L'Hypersonic" BF RDTA. Shown with drip tip and La Petite Box for demonstration purposes only. These are not included in this sale. This sale is ONLY for the atomizer!
  • Vaponaute - "L'Hypersonic" BF RDTA
  • Vaponaute - "L'Hypersonic" BF RDTA
  • Vaponaute - "L'Hypersonic" BF RDTA
  • Vaponaute - "L'Hypersonic" BF RDTA
  • Vaponaute - "L'Hypersonic" BF RDTA
  • Vaponaute - "L'Hypersonic" BF RDTA. Shown with drip tip and mod for demonstration purposes only. This sale is only for the atomizer.
0.06 KGS

 Product Description

L'Hypersonic BF Capable RDTA by Vaponaute

L'Hypersonic is Vaponaute's newest atomizer release, a 22mm new Rebuildable Tank Atomizer that is bottom feed capable!

L’HYPERSONIC is a rebuildable tank atomizer. This RDTA can be used with a Bottom Feeder / Squonker box or with a classic box thanks to the two included pins.

The Ultem reduced cylindrical chamber fits the shape of the coil to focus on flavors. An optional polycarbonate chamber is also available for purchase >>HERE<<.

Limited to a single batch of only 1800 pieces, this atty is still made in France, in the French Alps. You do not want to miss this release, because once they're gone, there will not be another production run, as per Vaponaute's typical release pattern!

The airholes were designed to be oriented towards the center of the coil creating an extra power supply for more vapor.

There are 2x3 airholes of 1.5mm which can be adjusted to have from 2 to 6 open airholes

The power of the air flow is increased by the airflow's bottom inclination of 25°, to eliminate any leaks in case of oversquonk.

The internal evaporation chamber is made of Ultem (high-temperature resistant material). An optional internal evaporation chamber made of clear polycarbonate is also available for purchase >>HERE<< to change the look of your L'Hypersonic!

An extra top cap barrel is included in polycarbonate with the atomizer.


  • Materials : Stainless Steel 316L, inside PEEK insulator & ULTEM/PC
  • Delivered with both BF pin and closed pin 
  • Diameter: 22mm
  • Height: 28.60mm (excl. driptip & 510 pin)

Spare kit included:

  • 1 black O-ring Viton ID16mm
  • 2 scews M2,5x4
  • 1 closed central pin
  • 1 small allen key

Note: Photos are shown of L'Hypersonic with drip tip and mod attached for representation only. Drip tip and mod are not included in sale.

WARNING: It is highly recommend that you fully clean out this product before the first time you use it. While the factory does a decent job at removing dust, shavings, machining lubricants and greases, there is still the potential for trace elements to remain, and it is best recommended that you do an additional cleaning to meet your standard of cleanliness.

DISCLAIMER: Polycarbonate components are prone to cracking when exposed to aggressive liquids such as (but are not all inclusive of this list) cinnamon, banana, menthol, anise, licorice, and citrus based liquids. While this product is made from a high grade of PC, there is no guarantee it can resist cracking against such liquids, and Vapes by Enushi will not provide any type of warranty against damage from these types of liquids.

DISCLAIMER: Rebuildable atomizers are for experienced vapers with access to meters and a working knowledge of Ohms Law, Watts Law, battery safety, and how general electricity works. Please ensure care is taken as to not cause damage nor harm to the atomizer, your battery, the vaping device, yourself, others, or personal property.

Vapes by Enushi is not responsible for misuse of product, or dangerously low coil builds. Vapes by Enushi is not liable for the use of improper batteries for your builds.

 Find Similar Products by Tag

 Find Similar Products by Category

Vendors Other Products

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...


Follow us on

Copyright 2019 Vapes by Enushi. All Rights Reserved.
Sitemap | Bigcommerce Premium Themes by PSDCenter

Click the button below to add the Vaponaute - "L'Hypersonic" BF RDTA to your wish list.