Phenom 18650 Mod by Vicious Ant

Design Follows Function

The Phenom mechanical tube mod by Vicious Ant was one of the first such mods in the industry to introduce a very clean line aesthetic with a flush top cap, and a unique locking mechanism to protect its short throw fire switch.

The flush mounted 510 connection point made for an integrated look with any atomizer attached to the top of this mod. Along with an elegantly styled body, the end result was the creation of a timeless beauty with a buttery smooth quarter turn lock ring.

Note: Due to age and time spent on shelf, the raw brass switch contacts as well as the body of the brass variant may have oxidized and tarnished a bit. This is easily cleaned with a solution of 1/4 cup vinegar to 1 tablespoon of salt. Dissolve salt in vinegar, and wipe across surface. Rinse thoroughly after you reveal the unoxidized brass underneath. For the body, you may coat it in Renaissance Wax to slow future oxidation. If cleaning brass contacts or the threads, we do NOT recommend applying wax nor any chemical brass cleaner (such as Brasso) on to the electrical conductivity areas, as these compounds can inhibit electrical conductivity.

Vicious Ant Phenom 18650 Dimensions:

• Height: 96mm
• Diameter: 22mm

Vicious Ant Phenom 18650 Specifications:

• 18650 Battery
• "VA" engraving
• Adjustable top cap pin
• Smooth locking mechanism
• Brass contacts

WARNING: This device is an unregulated mechanical device that is recommended FOR ADVANCED USERS ONLY. Use at your own risk. Users of mechanical devices must be aware of battery safety and ohms law in order to prevent risk and harm to the device, to person, or to property. Be aware, that mechanical mods such as this one do not have any short circuit protection. Pay attention to the position of the firing button at all times when batteries are inserted.

Vapes by Enushi is not responsible for misuse of product, or dangerously low coil builds. Vapes by Enushi is not liable for the use of improper batteries for your builds.