The Loki V2 is the sequel to the popular Loki RDA from Vapetalk Concepts Philippines, designed for cloud chasers and flavour chasers alike, the generous sized easy-to-build two-post deck allows for big coil builds and the large air flow ports allow for big wattage output.
Capable of bottom feeding or standard dripping.
AFC top cap allows setup for use in either single coil, or dual coil mode.
Comes with an extra plastic top cap section and an ultra wide bore drip tip for the plastic top cap for easy dripping, big airflow, and high heat resistance.
Available in three colours/finishes:
Note: Images shown of Loki V2 RDA attached to mod for demonstration purposes only. This sales listing is only for the Loki V2 RDA and does not include a mod.
WARNING: It is highly recommend that you fully clean out this product before the first time you use it. While the factory does a decent job at removing dust, shavings, machining lubricants and greases, there is still the potential for trace elements to remain, and it is best recommended that you do an additional cleaning to meet your standard of cleanliness.
DISCLAIMER: Polycarbonate components are prone to chemical cracking when exposed to aggressive liquids such as (but are not all inclusive of this list) cinnamon, banana, menthol, anise, licorice, and citrus based liquids. While this product is made from a high grade of polycarbonate, there is no guarantee it can resist cracking against such liquids, and Vapes by Enushi will not provide any type of warranty against damage from these types of liquids. Ultem is more resistant to chemical attacks and may not crack as easily as the polycarbonate options.
DISCLAIMER: Rebuildable atomizers are for experienced vapers with access to meters and a working knowledge of Ohms Law, Watts Law, battery safety, and how general electricity works. Please ensure care is taken as to not cause damage nor harm to the atomizer, your battery, the vaping device, yourself, others, or personal property.
Vapes by Enushi is not responsible for misuse of product, or dangerously low coil builds. Vapes by Enushi is not liable for the use of improper batteries for your builds.
Posted by Nick Miller on 2019 Oct 17th
Build quality of this atomizer is amazing, no imperfections and beautiful finish. The o rings are on the loose side but that is an easy fix. Juice well is deep enough but the posts block off the middle so that juice does not even out after dripping so be carefull not to overdrip.
I would love to see a 1 peice topcap aftermarket so that condensation does not build up between the two peices of the stock cap.
I am a roundwire builder and this rda will take any guage with ease. 3mm ID was a very tight fit and would strongly suggest 2.5mm coils.
All prices are in CAD