Loading... Please wait...


Armor Mods - "Armor S RDA", Black Edition

Hover over image to zoom

  • Armor Mods - "Armor S RDA", Black Edition
  • Armor Mods - "Armor S RDA", Black Edition
  • Armor Mods - "Armor S RDA", Black Edition
  • Armor Mods - "Armor S RDA", Black Edition
  • Armor Mods - "Armor S RDA", Black Edition
  • Armor Mods - "Armor S RDA", Black Edition
  • Armor Mods - "Armor S RDA", Black Edition
  • Armor Mods - "Armor S RDA", Black Edition
  • Armor Mods - "Armor S RDA", Black Edition
  • Armor Mods - "Armor S RDA", Black Edition
  • Armor Mods - "Armor S RDA", Black Edition
Armor Mods
0.06 KGS

Sorry but this item is currently unavailable. Please check back at a later stage.

 Product Description

Black Edition Armor S RDA by Armor Mods

The Armor S RDA by Armor Mods takes the classic deck known and loved in the the Armor 1.0 and 2.0 RDA, and improves on the overall design with a new cap assembly featuring a new low-noise air intake, easy-to-use airflow adjustment system that locks in place and does not pull off easily until set to an unlock mode, making cap removal from the deck very simple and easy.

This Black Edition version of the Armor S features the following components made of BLACK COATED STAINLESS STEEL:

  • Cap
  • Knurled air flow control ring
  • Knurled 24mm>22mm beauty ring

NEW with the introduction of the Armor S, is a fully integrated multi-function packaging like nobody has ever seen in the vaping industry before! This beautifully crafted machined aircraft aluminum atomizer package tube is anodized in a classy gunmetal & black colourway, and not only protects your atomizer for transport, but also acts as a threaded 510 build stand for your atomizer as well as a spare parts container! The tube is held on to the base via o-rings and easily pulls off, exposing the Armor S beautifully nestled in the base. Inside the lid of the tube is the matching knurled 24mm outer diameter beauty ring, while spare screws and o-rings are nestled in a hidden compartment underneath the atomizer! Just unscrew the Armor S and pop off the clear plastic lid to expose the spare parts!

This new redesigned air flow control system now allows users to place single coils on either side of the deck.

Turning the air flow control ring clockwise engages the cap in single airflow mode, while turning it counter-clockwise engages the dual coil air flow mode. Setting the cap in between these two positions places the cap in unlock mode, allowing the user to easily pull the air flow control ring off the cap for cleaning and maintenance.

Following the 1.0 and 2.0, the deck can be built with single coils (with the use of the included PEEK single coil reducer for better flavour production), or dual coils for higher air and power requirements for greater vapour production.

A single coil reducer (SCR) is included to effectively block off half the chamber space and air flow from that size to maximize flavour production. Made from PEEK, it is very resilient to heat.

Proprietary sized black Delrin drip tip is included to minimize heat transfer to the user's lips, and compatible with all drip tips designed for the Armor 2.0. (Note: Not all Armor 1.0 drip tips may fit, as the hidden section is longer on this version, which may touch the coil on the 2.0 or the Armor S.)

Deeper juice well allows greater juice capacity.

Re-engineered two-post build design allows for a much more solid post design, resolving issues where users were over-tightening and causing posts to bend or twist.

Incredible flavour and vapour is produced with this single or dual coil atomizer with an ultra compact chamber.

22mm outer diameter.

Package Contents:

  • Armor S RDA, Black Edition
  • Armor S Knurled 24mm Beauty Ring, Black Edition
  • Armor S Knurled AFC Ring, Black Edition
  • Bottom feed pin (already installed)
  • Solid pin for standard dripping
  • Black Delrin proprietary sized drip tip
  • PEEK single coil reducer
  • Spare o-rings
  • Spare coil post grub screws
  • Machined aluminum package/case
  • Build stand

WARNING: It is highly recommend that you fully clean out this product before the first time you use it. While the factory does a decent job at removing dust, shavings, machining lubricants and greases, there is still the potential for trace elements to remain, and it is best recommended that you do an additional cleaning to meet your standard of cleanliness.

DISCLAIMER: Rebuildable atomizers are for experienced vapers with access to meters and a working knowledge of Ohms Law, Watts Law, battery safety, and how general electricity works. Please ensure care is taken as to not cause damage nor harm to the atomizer, your battery, the vaping device, yourself, others, or personal property.

Vapes by Enushi is not responsible for misuse of product, or dangerously low coil builds. Vapes by Enushi is not liable for the use of improper batteries for your builds.

 Find Similar Products by Tag

armor  armorsrda  armour  Atomizer  BF  Black  Bottom  Dripping  Edition  Feed  knurled  Mods  RDA  Rebuildable  

 Find Similar Products by Category

Vendors Other Products

 Product Reviews

  1. Perfect

    Posted by Nick Miller on 2020 Jan 21st

    Everything about this RDA is smooth
    Airflow is perfect wide open on dual coils
    Black coating is holding up great after couple weeks
    No machine marks, no scratches, no machine oil
    You get what you pay for

You Recently Viewed...

What's News


Follow us on

Copyright 2020 Vapes by Enushi. All Rights Reserved.
Sitemap | Bigcommerce Premium Themes by PSDCenter

Click the button below to add the Armor Mods - "Armor S RDA", Black Edition to your wish list.