The Solo RDA by Dee Mods is an innovative single coil flavour atomizer that is easy to rebuild, easy to re-wick, and has a unique feature that allows users to rotate the deck to align the air flow inlets in any direction relative to their mod!
This release will go on sale at 22:00 EST (10PM Eastern Standard Time) on Tuesday, January 16th, 2018! Set your calendars and alarms now so you don't miss this one!
OFFICIAL COUNTDOWN TIMER: >>https://www.timeanddate.com/countdown/generic?iso=20180318T22&p0=250&msg=Solo+release+%233&font=slab<<
LIMIT ONE PER PERSON
Incredible flavour and vapour is produced with this dual side air flow atomizer, which hits the coil on both sides for maximum performance and efficiency.
Includes a black Delrin 22mm cap with side air inlets. Additional caps will become available in 22mm and 24mm sizes, with top air inlets or side air inlets, and in different materials and finishes.
Note: The Solo is designed to have a very secure cap fitment to the deck. If you are having difficulty removing the cap from the deck, use a rubber band to grip the cap, and distribute pressure evenly all around the cap as you pull. If you pinch the cap, it will apply pressure on the two pinch points, making it more difficult to remove. Additionally, you may remove one of the o-rings to make it easier to remove and attache the cap.
Note: The Solo is an advanced user atomizer that is designed with a separate 510 negative connection that interlocks with the deck. The Solo is only recommended for advanced users with a very thorough understanding of how grounding connections are made within finely machined components. After securing the Solo to your device, you MUST ensure that the deck is fully secured to the connector, by attempting to wiggle the deck up and down. If it moves, then it is not connected, in which case, you must push down on the RDA to line up the tabs of the connector with the notched channel in the deck, then ROTATE the deck to slide the tabs into the channel, which will secure the ground connection. At this point, you can rotate the deck till the air flow faces the direction you desire. If using a mod with a fixed 510 positive pin or telescopic screw pin, you cannot push down further to make the connection. In which case, remove the atomizer from the mod and push the connector by hand and rotate the deck a bit, so that the tabs connect into the channel. Then attach it to your mod and rotate until air flow is at the desired direction. Be aware, that if you attempt to use the Solo without properly connecting the base to the deck, you will have a poor connection that will result in a number of problems, such as very high resistance readings, scorch marks around the connector and deck, weak vapour production, and excessive heat production from the entire deck which can result in damage to the atomizer and your mod. These issues will create visual indicators of improper usage, and should any of these visual indicators be apparent, warranty will not cover any damages that occur.
Note: Ensure coil leads are trimmed extremely flush to the post connectors (even better, if you wiggle the lead till it breaks at the connection point), or it could scratch your cap.
WARNING: It is highly recommend that you fully clean out this product before the first time you use it. While the factory does a decent job at removing dust, shavings, machining lubricants and greases, there is still the potential for trace elements to remain, and it is best recommended that you do an additional cleaning to meet your standard of cleanliness.
DISCLAIMER: Rebuildable atomizers are for experienced vapers with access to meters and a working knowledge of Ohms Law, Watts Law, battery safety, and how general electricity works. Please ensure care is taken as to not cause damage nor harm to the atomizer, your battery, the vaping device, yourself, others, or personal property.
Vapes by Enushi is not responsible for misuse of product, or dangerously low coil builds. Vapes by Enushi is not liable for the use of improper batteries for your builds.
This product hasn't received any reviews yet. Be the first to review this product!
All prices are in USD