Replacement doors made of Juma or Carbon Fiber for your Spade Regulated BF mod by Vicious Ant.
Fits both the DNA75C model as well as the SX475J Spade by Vicious Ant. Only for the 18650 Spade.
To ensure a secure fitment to all units, Vicious Ant has produced these doors just slightly over-sized to ensure fitment in to every mod, as slight variances from mod to mod may result in a loose fit in some mods and a tight fit in other mods if it is made exactly to specification size. As a result, a slightly large size will ensure a tighter fit in mods that have a slightly over sized cut out. These variances are due to tolerance differences during machining, plus the varying thickness of the Cerakoting used to colour the Spade frames. In most cases, the door can fit in to the mod with a bit of pushing in specific edges, and over time, the soft Juma will wear down for a precision fit with your specific mod. However, in some cases of a very tight fit, some material may be needed to be removed with some micro mesh or fine sand paper to bring it down to the proper size.
Juma is a high grade material made of mineral base materials and resin that resists breaking, is easy to machine, with a high surface hardness, and resistant to many chemicals.
Note: Due to the nature of Juma, your particular unit's panel may not look exactly as shown in these photos, as each piece is unique in pattern and gradient.
The Carbon Fiber door is a full carbon fiber weave, featuring the stiffness, hardness, and light weight properties of carbon fiber.
Spade mod shown in photos is for demonstration purposes only, and is not included in this sale. This sale is ONLY for the door.
Posted by brian L harris on 2019 Jan 24th
beatiful door, needed a little sanding to make it fit perfect. would purchase again
Posted by Brady Mitten on 2019 Jan 22nd
Top notch customer service from Enushi. They shipped promptly (the same day it was purchased). It came very well packaged and there was 0% chance it was going to be damaged through normal shipping. The only downside was i had to go out and purchase some wire mesh sanding sponges to sand down to make it fit in my spade. Enushi offered to do it if I sent back but it was easy enough and took 5 minutes. Great looking door (Carbon Fiber). My only recommendation is to get pics of the actual door before you purchase. An acquaintance received the black juma and it looked nothing like the photo. Will not hesitate to purchase from Enushi again.
All prices are in USD