The Astra VMT-217 is a beautifully exquisite mechanical tube mod made by Vapemonster in South Korea.
Featuring ergonomic lines and a telescopic design giving it the ability to take a variety of cell sizes, the Astra performs as well as it looks, and the experience from using the device to unpackaging it brings forth a level of excitement never before seen from a mod maker.
Note: The Comet RDA and Beluga Rings shown in the photos are NOT included in the sale of the Astra, but can be purchased separately.
The Astra VMT-217 accepts the following cell sizes:
High discharge IMR batteries are best recommended for this device.
A simple flush mounted bottom firing spring loaded switch with a non-spinning design and brass contact delivers hard hits.
Available in the following materials and finishes:
A 24mm landing pad at the top of the mod fits most atomizers on the market, and can easily accept 24mm beauty rings to flush mount 22mm diameter atomizers.
A hybrid 510 connection allows direct battery contact to the atomizer for the highest performance and minimal voltage drop.
WARNING: This is a hybrid mechanical mod. If you are not aware of what a hybrid mod is, you should NOT use this device. For safety, please ensure your atomizer's 510 center pin protrudes past the threading of the atomizer base. DO NOT USE any atomizer that has a floating or moving 510 center pin.
WARNING: The Vapemonster Astra VMT-217 is an advanced user device, and is NOT recommended for beginners.
DISCLAIMER: Mechanical mods are for experienced vapers with access to meters and a working knowledge of Ohms Law, Watts Law, battery safety, and how general electricity works. Please ensure care is taken as to not cause damage nor harm to the atomizer, your battery, the vaping device, yourself, others, or personal property.
Vapes by Enushi is not responsible for misuse of product, or dangerously low coil builds. Vapes by Enushi is not liable for the use of improper batteries for your builds.
NOTE: Raw brass will tarnish over time. You will need to maintain these materials to keep the bright luster.
Posted by Justin on 2018 Jul 5th
Craftsmanship wieght look and feel are amazing. If you are ordinging to the states expect to get it held up by customs, but calling USPS after a few days at the customs inspection facility helped get it through faster. Thanks Enushi! Quality product that was totally worth the wait and price!
All prices are in CAD