PSU 6mL Tank for the GT IV (GT4) by Taifun
Replacement tank for the Taifun GT IV RTA to replace the entire upper tank glass and shield for lighter weight and higher shock durability while increasing liquid capacity. Must use original chimney and top cap components.
Note: Photo shown off full atomizer for demonstration purposes only. Atomizer is not included in this sale. This sale is only for the PSU tank section piece.
Made with PSU (Polysulfone).
Benefits of PSU:
- Very high strength and rigidity
- High heat resistance (-50 to 170° C)
- Excellent chemical resistance, greater than Ultem to resist cracking from most liquids.
- Physiologically inert.
NOTE: It is highly recommend that you fully clean out this product before the first time you use it. While the factory does a decent job at removing dust, shavings, machining lubricants and greases, there is still the potential for trace elements to remain, and it is best recommended that you do an additional cleaning to meet your standard of cleanliness.
-
Love it!
Definitely worth it for big juice sucking builds and less filling over longer periods of time. I also found the OG metal cage for the GT4 would mess my fingers up over long periods of time from adjusting juice flow and this completely fixed the issue. if you overfill it you can squeeze almost 7ml in the tank, on par with the Kayfun 5 squared SE for capacity.
