null
Categories

Taifun - "GT IV (GT4) MTL Chamber Reducer (Ultem)"

Brand :

(No reviews yet) Write a Review

DISCONTINUED. Search "GT4 MTL PSU" for new version.

Ultem MTL Chamber Reducer for GT IV (GT4) by Taifun

DISCONTINUED. See new version: >> Taifun GT IV / S (GT4 / GT4S) MTL Chamber Reducer (PSU) <<

This Ultem MTL Chamber Reducer closes down the empty space in the chamber of the Taifun GT IV to present a more flavourful vapour production for lower wattage setups.

Works best when combined with the >>Taifun GT IV MTL Positive Pole <<.

NOTE: This reducer is NOT suitable for use with oversized coil installations. The inner diameter of the evaporation chamber is reduced from 17.0mm to 11.9mm, so care must be taken to avoid contacting your coil to this reducer, or it may melt the Ultem.

To install, press the insert firmly in to the evaporation chamber bell of the Taifun GT IV's tank section, ensuring a ~1.5mm distance between the bottom of the reducer and the top of the threads (see last product photo). To remove, carefully push out the insert with a thin and long tool that will fit through the chimney on the drip tip side. If the chamber reducer is tilted, re-seat it with your finger and turn it in the evaporation chamber with an unscrewing motion (see product photo).

When installing the tank, always ensure the chamber reducer is properly seated in the bell (in case the reducer moves out of place during disassembly.

Properties of Polyetherimide (PEI / Ultem):

  • Very high strength and rigidity
  • High heat resistance (-50 to 170 degrees Celsius)
  • Excellent chemical resistance
  • Is physiologically harmless

Contents:

  • 1x Ultem Chamber Reducer with
  • 1x O-ring (installed)
  • 1x O-ring spare, 4x1mm

For use with the >>Taifun GT IV (GT4)<<.

Best when paired with the >> Taifun GT IV (GT4) MTL Positive Pole <<.

NOTE: It is highly recommend that you fully clean out this product before the first time you use it. While the factory does a decent job at removing dust, shavings, machining lubricants and greases, there is still the potential for trace elements to remain, and it is best recommended that you do an additional cleaning to meet your standard of cleanliness.