Loading... Please wait...

Categories

OLC - "Stratum 0 (Zero), Prestige"

Hover over image to zoom

  • OLC - "Stratum 0 (Zero), Prestige"
  • OLC - "Stratum 0 (Zero), Prestige"
  • OLC - "Stratum 0 (Zero), Prestige"
  • OLC - "Stratum 0 (Zero), Prestige"
  • OLC - "Stratum 0 (Zero), Prestige"
  • OLC - "Stratum 0 (Zero), Prestige"
  • OLC - "Stratum 0 (Zero), Prestige"
  • OLC - "MOSFET V2T"
  • OLC - "Stratum 0 (Zero), Prestige"
  • OLC - "Stratum 0 (Zero), Prestige". Atomizer is not included in sale.
  • OLC - "Stratum 0 (Zero), Prestige". Atomizer is not included in sale.
OLC
CAD$394.99
Weight:
0.27 KGS

 Product Description

Stratum 0 (Zero) Prestige by OLC

The Stratum 0 is one of the most highly sought after tube mods currently on the market, due to its ultra compact size, ability to take different battery sizes (18650, 20650, 20700, 21650, and 21700), plus the ability to fire as low as 0.05 Ohms, thanks to the heart of the Stratum Zero: the Model 2019 OLC MOSFET V2T, jointly developed between OLC Manufacture and a laboratory of instruments for military aviation.

This PRESTIGE version of the Stratum 0 features a bright brushed finish to match the finish of most atomizers on the market.

The OLC MOSFET V2T features dual military-grade MOSFET chips and a side mounted switch that is interfaced via a side firing trigger lever bar that is laser cut into the side of the tube wall, giving a satisfying yet subtle *click* to indicate engagement. The dual MOSFET design allows for extremely fast ramp up time with zero delay.

Safety features are integrated into the OLC MOSFET V2T, such as reverse-polarity protection, short circuit protection, and an integrated lock/unlock function (3 clicks to lock or unlock.)

IMPORTANT USAGE NOTE: The top cap is NOT designed to be adjustable! Do NOT operate with the cap unscrewed, or you risk damage to the MOSFET chip. The top cap is to remain securely screwed down at all times to ensure proper conductivity of the MOSFET circuitry to the body of the Stratum Zero. Additionally, if you unscrew the top cap while a battery is secured in the device, this may cause the MOSFET to push out of the chip cavity, causing an improper seating that may result in improper engagement of the trigger bar to the firing switch. If the MOSFET's firing switch gets seated above the trigger bar and you attempt to screw down the cap, you WILL crush the firing switch, rendering it inoperable! As such, you should ONLY remove the top cap if there is no battery within the device (or at least have the battery cap tension backed off). If you are unsure if the MOSFET is properly seated in the chip cavity, remove the top cap to inspect the location of the black plastic firing switch on the MOSFET, and ensure it is securely behind the trigger bar of the mod before you screw the top cap back down. Physical damage to the firing switch due to user error is apparent and is NOT covered by warranty.

Two different top caps are included to allow users to adjust for a flush edged fit of their atomizer to this elegant curved tube. One cap for 22mm atomizers, and a second cap for 24mm atomizers.

Two different bottom caps are included to allow users to adjust for different height battery formats. One cap for 65mm tall batteries (18650 or 20650), and a second cap for 70mm tall batteries (20700 or 21700).

Two battery diameter sizing adapter bands are also included to allow users to fit 18650 batteries into the tube, properly centered and without side-to-side movement.

All components are contained within a form fitted wooden box, lined with a soft material to protect your mod and parts, along with your serial number plate contained within.

OLC MOSFET V2T Specifications:

  • 3 clicks to lock or unlock
  • Reverse polarity protection
  • Short circuit protection
  • Protection against battery discharge below 2.65 Volts
  • 10 second cut off timer
  • Capable of firing as low as 0.05 Ohms (please only use coil resistances that your battery can handle)
  • Protection against liquid ingress

Mod Specifications:

  • Diameter At Widest Point: 26mm
  • Diameter At Thinnest Point: 23mm
  • Height With 70mm Battery Cap: 80.4
  • Height with 65mm Battery Cap: 75.4mm
  • Battery Format: 18650, 20650, 20700, or 21700
  • Atomizer Size: 22mm diameter or 24mm diameter
  • Connection type: 510

Recommended Batteries:

Package Contents:

  • Stratum 0, Prestige mod Tube
  • 24mm atomizer diameter top cap
  • 22mm atomizer diameter top cap
  • Battery cap for 65mm long batteries
  • Battery cap for 70mm long batteries
  • Stratum MOSFET V2T
  • 2x 18mm to 21mm battery diameter adapter bands
  • Laser engraved authenticity plate featuring the model name & serial number
  • Decorative wooden presentation box

DISCLAIMER: Mechanical mods are for experienced vapers with access to meters and a working knowledge of Ohms Law, Watts Law, battery safety, and how general electricity works. Please ensure care is taken as to not cause damage nor harm to the atomizer, your battery, the vaping device, yourself, others, or personal property.

Vapes by Enushi is not responsible for misuse of product, or dangerously low coil builds. Vapes by Enushi is not liable for the use of improper batteries for your builds.

 Find Similar Products by Tag

21700  manufacture  Mod  mosfet  OLC  prestige  Stratum  stratumzero  Tube  Vape  zero  

 Find Similar Products by Category

Vendors Other Products

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

newsletter

Follow us on

Copyright 2019 Vapes by Enushi. All Rights Reserved.
Sitemap | Bigcommerce Premium Themes by PSDCenter

Click the button below to add the OLC - "Stratum 0 (Zero), Prestige" to your wish list.