Loading... Please wait...


OLC - "Stratum 0 (Zero) Mini, Black Ornament" 18350 MOSFET Tube Mod

Hover over image to zoom

  • OLC - "Stratum 0 (Zero) Mini, Black Ornament" 18350 MOSFET Tube Mod
  • OLC - "Stratum 0 (Zero) Mini, Black Ornament" 18350 MOSFET Tube Mod
  • OLC - "Stratum 0 (Zero) Mini, Black Ornament" 18350 MOSFET Tube Mod
  • OLC - "Stratum 0 (Zero) Mini, Black Ornament" 18350 MOSFET Tube Mod
  • OLC - "Stratum 0 (Zero) Mini, Black Ornament" 18350 MOSFET Tube Mod
OLC Vape
RRP: CAD$365.99
CAD$356.99 (You save CAD$9.00)
0.13 KGS

 Product Description

Stratum 0 (Zero) Mini, Black Ornament 18350 MOSFET Tube Mod by OLC

The Stratum 0 (Zero) by OLC is one of the most highly sought after tube mods currently on the market, due to its ultra compact size, now made even smaller with this 18350 "Mini" model!

At the heart of the Stratum Zero is the OLC MOSFET, now upgraded to the Model V3 BLACK MOSFET, jointly developed between OLC Manufacture and a laboratory of instruments for military aviation.

The Stratum Zero MINI allows users to set up the smallest ultra compact setup possible, and requires the usage of 18350 cells. We recommend the KeepPower IMR 18350 1200mAh.

This BLACK ORNAMENT version of the Stratum 0 Mini features a lightly polished finish with a laser ornamental engraving across the entire body and the caps, then coated in black PVD for an elegant finish that is durable against daily wear and tear..

The OLC MOSFET V3 features dual military-grade MOSFET chips and a side mounted switch that is interfaced via a side firing trigger lever bar that is laser cut into the side of the tube wall, giving a satisfying yet subtle *click* to indicate engagement. The dual MOSFET design allows for extremely fast ramp up time with zero delay.

This new OLC V3 Black MOSFET has a couple of changes, including:

  • Upgrade to Japanese switch for greater durability.
  • LED surface mounted lights to provide users with a visual indicator of lock/unlock status and firing status.

Safety features are integrated into the OLC MOSFET BLACK V3, such as reverse-polarity protection, short circuit protection, and an integrated lock/unlock function (3 clicks to lock or unlock.)

IMPORTANT USAGE NOTE: The top cap is NOT designed to be adjustable! Do NOT operate with the cap unscrewed, or you risk damage to the MOSFET chip. The top cap is to remain securely screwed down at all times to ensure proper conductivity of the MOSFET circuitry to the body of the Stratum Zero. Additionally, if you unscrew the top cap while a battery is secured in the device, this may cause the MOSFET to push out of the chip cavity, causing an improper seating that may result in improper engagement of the trigger bar to the firing switch. If the MOSFET's firing switch gets seated above the trigger bar and you attempt to screw down the cap, you WILL crush the firing switch, rendering it inoperable! As such, you should ONLY remove the top cap if there is no battery within the device (or at least have the battery cap tension backed off). If you are unsure if the MOSFET is properly seated in the chip cavity, remove the top cap to inspect the location of the black plastic firing switch on the MOSFET, and ensure it is securely behind the trigger bar of the mod before you screw the top cap back down. Physical damage to the firing switch due to user error is apparent and is NOT covered by warranty.

Two battery diameter sizing adapter bands are also included to allow users to fit 18350 batteries into the 21mm inner diameter tube, properly centered and without side-to-side movement.

All components are contained within a form fitted wooden box, lined with a soft material to protect your mod and parts, along with your serial number plate contained within.

OLC MOSFET V3 BLACK Specifications:

  • 3 clicks to lock or unlock
  • Reverse polarity protection
  • Short circuit protection
  • Protection against battery discharge below 2.65 Volts
  • 10 second cut off timer
  • Capable of firing as low as 0.05 Ohms (please only use coil resistances that your battery can handle)
  • Protection against liquid ingress
  • LED light indicators
  • Durable Japanese surface mounted switch

Mod Specifications:

  • Diameter At Widest Point: 26mm
  • Diameter At Thinnest Point: 23mm
  • Height: 45.3mm
  • Battery Format: 18350
  • Atomizer Size: 22mm diameter
  • Connection type: 510
  • Unique serial number laser engraved on bottom cap

Recommended Batteries:

Package Contents:

  • Stratum 0 Black Ornament Mini mod
  • Stratum MOSFET V3 BLACK
  • 2x 18mm to 21mm battery diameter adapter bands
  • Decorative wooden presentation box

NOTE: Images shown with atomizer attached are for demonstration purposes, and the atomizer is NOT included in this sale. This sales listing is only for the mod.

DISCLAIMER: Mechanical mods are for experienced vapers with access to meters and a working knowledge of Ohms Law, Watts Law, battery safety, and how general electricity works. Please ensure care is taken as to not cause damage nor harm to the atomizer, your battery, the vaping device, yourself, others, or personal property.

Vapes by Enushi is not responsible for misuse of product, or dangerously low coil builds. Vapes by Enushi is not liable for the use of improper batteries for your builds.

 Find Similar Products by Tag

18350  Black  dlc  engraving  manufacture  Mini  Mod  mosfet  OLC  Ornament  PVD  Stratum  stratumzeroblack  Tube  Vape  zero  

 Find Similar Products by Category

Vendors Other Products

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

What's News


Follow us on

Copyright 2020 Vapes by Enushi. All Rights Reserved.
Sitemap | Bigcommerce Premium Themes by PSDCenter

Click the button below to add the OLC - "Stratum 0 (Zero) Mini, Black Ornament" 18350 MOSFET Tube Mod to your wish list.