The Stratum 0 is one of the most highly sought after tube mods currently on the market, due to its ultra compact size, ability to take different battery sizes (18650, 20650, 20700, 21650, and 21700), plus the ability to fire as low as 0.05 Ohms, thanks to the heart of the Stratum Zero: the Model 2019 OLC MOSFET V2T, jointly developed between OLC Manufacture and a laboratory of instruments for military aviation.
This ELEGANCE ORNAMENT version of the Stratum 0 features a matte media blasted surface finish, and then completed with an intricate laser engraved ornamental pattern that is truly unique. Limited to only 10 pieces in the world!
The OLC MOSFET V2T features dual military-grade MOSFET chips and a side mounted switch that is interfaced via a side firing trigger lever bar that is laser cut into the side of the tube wall, giving a satisfying yet subtle *click* to indicate engagement. The dual MOSFET design allows for extremely fast ramp up time with zero delay.
Safety features are integrated into the OLC MOSFET V2T, such as reverse-polarity protection, short circuit protection, and an integrated lock/unlock function (3 clicks to lock or unlock.)
IMPORTANT USAGE NOTE: The top cap is NOT designed to be adjustable! Do NOT operate with the cap unscrewed, or you risk damage to the MOSFET chip. The top cap is to remain securely screwed down at all times to ensure proper conductivity of the MOSFET circuitry to the body of the Stratum Zero. Additionally, if you unscrew the top cap while a battery is secured in the device, this may cause the MOSFET to push out of the chip cavity, causing an improper seating that may result in improper engagement of the trigger bar to the firing switch. If the MOSFET's firing switch gets seated above the trigger bar and you attempt to screw down the cap, you WILL crush the firing switch, rendering it inoperable! As such, you should ONLY remove the top cap if there is no battery within the device (or at least have the battery cap tension backed off). If you are unsure if the MOSFET is properly seated in the chip cavity, remove the top cap to inspect the location of the black plastic firing switch on the MOSFET, and ensure it is securely behind the trigger bar of the mod before you screw the top cap back down. Physical damage to the firing switch due to user error is apparent and is NOT covered by warranty.
Two different top caps are included to allow users to adjust for a flush edged fit of their atomizer to this elegant curved tube. One cap for 22mm atomizers, and a second cap for 24mm atomizers.
Two different bottom caps are included to allow users to adjust for different height battery formats. One cap for 65mm tall batteries (18650 or 20650), and a second cap for 70mm tall batteries (20700 or 21700).
Two battery diameter sizing adapter bands are also included to allow users to fit 18650 batteries into the tube, properly centered and without side-to-side movement.
All components are contained within a form fitted wooden box, lined with a soft material to protect your mod and parts, along with your serial number plate contained within.
DISCLAIMER: Mechanical mods are for experienced vapers with access to meters and a working knowledge of Ohms Law, Watts Law, battery safety, and how general electricity works. Please ensure care is taken as to not cause damage nor harm to the atomizer, your battery, the vaping device, yourself, others, or personal property.
Vapes by Enushi is not responsible for misuse of product, or dangerously low coil builds. Vapes by Enushi is not liable for the use of improper batteries for your builds.
This product hasn't received any reviews yet. Be the first to review this product!
All prices are in CAD