Loading... Please wait...


Kilic Customs - "AIRLab RM" BF RDA

Hover over image to zoom

  • Kilic Customs - "AIRLab RM" BF RDA
  • Kilic Customs - "AIRLab RM" BF RDA
  • Kilic Customs - "AIRLab RM" BF RDA
  • Kilic Customs - "AIRLab RM" BF RDA
  • Kilic Customs - "AIRLab RM" BF RDA
  • Kilic Customs - "AIRLab RM" BF RDA
  • Kilic Customs - "AIRLab RM" BF RDA
  • Kilic Customs - "AIRLab RM" BF RDA and Explorer Mod
  • Kilic Customs - "AIRLab RM" BF RDA and Explorer Mod
  • Kilic Customs - "AIRLab RM" BF RDA and Explorer Mod
Kilic Customs
0.06 KGS

Sorry but this item is currently unavailable. Please check back at a later stage.

 Product Description

AIRLab RM by Kilic Customs

The AIRLab RM (Re-Mastered) by Kilic Customs is the refined version of the original AIR Lab, with greater thought and functionality built in to this new version.

Over a year and a half allowed Kilic Customs to learn and gain much knowledge from the original AIRLab RDA experience curve. It is known that the original AIRLab was no slouch in performance, but there was still room for improvement, and as with all masters, they were not satisfied with what already existed. Based on feedback gathered on the original design, it was back to the drawing board to make the AIRLab experience even better!

In the course of designing the AIRLab ReMastered, Kilic Customs was adamant on the idea of enhancing it and making it more practical for users, while retaining the quintessential essence of the AIRLab, hence the suffix "RM" for "ReMastered".

The AIRLab RM is uniquely designed on its exterior and interior, with the interchangeable options for almost every area of this atomizer, allowing users to adjust the performance and aesthetic of this atomizer to suit their unique vaping needs and to fine tune their vaping experience. Created with digital air flow simulations of the internal evaporation chamber ensures a proper balance between air intake and circulation within the atomizer's chamber, while still retaining the ideology of the AIRLab's small chamber, allowing for maximum flavour production. For users of the original AIRLab, it is already known that the key to its incredible flavour production laid within the extremely small evaporation chamber to allow for maximum flavour compression.

Together, the characteristics of the AIRLab RM's refined air intake and internal evaporation chamber design provides a flavourful and smooth vaping experience with a look that will distinguish itself from the rest.

Now included, is a stainless steel 510 drip tip adapter, allowing you to use any standard 510 connection drip tip with the AIRLab.

The air intake ring can be removed to change the exterior aesthetic and style of your AIRLab RM to best suit your style.

Air intake ramps can be swapped with (included) open block ramps for a slightly less restriction and airflow - best for use with larger diameter (3.0mm) coils at higher wattages.

Most old AIRLab accessories will fit, including the threaded beauty ring, drip tip, and 510 adapter options.


  • Height (with drip tip): 24.65mm
  • Height (without drip tip): 17.03mm
  • Outer Diameter: Base: 22mm
  • Evaporation Chamber Inner Diameter: 16mm
  • Systematic 3D design machining
  • Redesigned C-section wire trapping
  • On-deck cut-out notches
  • Heat resistant black PEEK drip tip
  • 316 SS (food grade) body, cap, and deck
  • Industrial PEEK insulators
  • Custom 316 SS post screws
  • Custom 316 SS standard and bottom feeding pins
  • Industrial tear-resistant O rings
  • Interchangeable custom ring compatibility
  • Custom interchangeable airflow blocks
  • Custom interchangeable air intake sleeves

Package Contents:

  • 1x AIRLab RM RDA
  • 2x Post screws (pre-installed)
  • 2x Dual Cyclops Air Flow Blocks (pre-installed)
  • 2x Insulators (pre-installed)
  • 2x Open Ramp Air Flow Blocks
  • 1x Fin Sleeve Air Flow Ccontrol Ring
  • 1x Full Sleeve Air Flow Control Ring
  • 1x Proprietary sized black PEEK drip tip
  • 1x SS 510 drip tip adapter
  • 1x Standard (solid) dripping 510 pin (pre-installed)
  • 1x Bottom feed 510 pin
  • 1x Spare parts pack
  • 1x AIRLab sticker & card
  • 1x Carry/storage pouch

WARNING: It is highly recommend that you fully clean out this product before the first time you use it. While the factory does a decent job at removing dust, shavings, machining lubricants and greases, there is still the potential for trace elements to remain, and it is best recommended that you do an additional cleaning to meet your standard of cleanliness.

DISCLAIMER: Rebuildable atomizers are for experienced vapers with access to meters and a working knowledge of Ohms Law, Watts Law, battery safety, and how general electricity works. Please ensure care is taken as to not cause damage nor harm to the atomizer, your battery, the vaping device, yourself, others, or personal property.

Vapes by Enushi is not responsible for misuse of product, or dangerously low coil builds. Vapes by Enushi is not liable for the use of improper batteries for your builds.

 Product Videos

AIRLab RM (remastered) by Kilic Customs
  • AIRLab RM (remastered) by Kilic Customs
    I really do love the AIRLab RM, as it comes it is perfect for ...

 Find Similar Products by Tag

Air  airlab  Atomizer  BF  Bottom  Custom  Customs  Dripping  Feed  kilic  Lab  Master  RDA  Rebuildable  Silver  squonk  

 Find Similar Products by Category

Vendors Other Products

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

What's News


Follow us on

Copyright 2020 Vapes by Enushi. All Rights Reserved.
Sitemap | Bigcommerce Premium Themes by PSDCenter

Click the button below to add the Kilic Customs - "AIRLab RM" BF RDA to your wish list.