Loading... Please wait...

Categories

EVL Vapors - Reaper V3 Conversion Kit, 1.8mm MTL

Hover over image to zoom

  • EVL Vapors - Reaper V3 Conversion Kit, 1.8mm MTL
EVL Vapors
CAD$34.99
Weight:
0.02 KGS

 Product Description

Reaper V3 Conversion Kit, 1.8mm MTL by EVL Vapors

The MTL Conversion allows for a quick and simple conversion of the Reaper V3 from the standard 2.7mm max airflow down to a much more restricted 1.8mm that can be adjusted all the way down to 0.8mm for a restricted MTL experience.

All EVL Vapors Reaper V3 products come securely packed in a metal tin and packed with Muji cotton for your wicking pleasure! Practical on two ends!

Included in Kit

  • 1.8mm air outlet deck with positive post fitted
  • MTL airflow ring, offering six airflow options: 0.8mm, 1.0mm, 1.2mm, 1.4mm, 1.6mm, and 1.8mm

Installation Instructions:

  1. Undo positive screw on the base of the atomizer.
  2. Pull the fitted deck straight up and out.
  3. Ensure small o-ring is located under the PEEK insulator disk.
  4. Push the new MTL deck into position.
  5. Gently screw the positive screw on the base of the atomizer up.
  6. Check the newly fitted deck does not wobble up or down or from side to side. If it does, press it down a little more and gently tighten the screw on the base again.
  7. Swap out airflow ring.
  8. Enjoy.

NOTE: It is highly recommend that you fully clean out this product before the first time you use it. While the factory does a decent job at removing dust, shavings, machining lubricants and greases, there is still the potential for trace elements to remain, and it is best recommended that you do an additional cleaning to meet your standard of cleanliness.

DISCLAIMER: Rebuildable atomizers are for experienced vapers with access to meters and a working knowledge of Ohms Law, Watts Law, battery safety, and how general electricity works. Please ensure care is taken as to not cause damage nor harm to the atomizer, your battery, the vaping device, yourself, others, or personal property.

Vapes by Enushi is not responsible for misuse of product, or dangerously low coil builds. Vapes by Enushi is not liable for the use of improper batteries for your builds.

 

 Find Similar Products by Tag

Conversion  Evil  EVL  Kit  MTL  Reaper  V3  Vaper  Vapers  Vapor  Vapors  

 Find Similar Products by Category

Vendors Other Products

 Product Reviews

  1. Must Have Air Flow Accessory

    Posted by Larry In NC on 2019 May 1st

    I wanted the MTL version of the Reaper v3, but only the DL version was available when I ordered. So, I purchased the MTL conversion kit. Now I have a very versatile RTA that can be configured in many way with lots of air flow options. Conversion kits are must-have items.


You Recently Viewed...

newsletter

Follow us on

Copyright 2019 Vapes by Enushi. All Rights Reserved.
Sitemap | Bigcommerce Premium Themes by PSDCenter

Click the button below to add the EVL Vapors - Reaper V3 Conversion Kit, 1.8mm MTL to your wish list.