Loading... Please wait...


Athea Mods - "In'Ax v5" Batch 2, Genesis RTA

Hover over image to zoom

  • Athea Mods - "In'Ax v5" Batch 2, Genesis RTA
  • Athea Mods - "In'Ax v5" Batch 2, Genesis RTA
  • Athea Mods - "In'Ax v5" Batch 2, Genesis RTA
  • Athea Mods - "In'Ax v5" Batch 2, Genesis RTA
  • Athea Mods - "In'Ax v5" Batch 2, Genesis RTA
  • Athea Mods - "In'Ax v5" Batch 2, Genesis RTA
Athea Mods
0.08 KGS

Sorry but this item is currently unavailable. Please check back at a later stage.

 Product Description

In'Ax v5 Batch 2 by Athea Mods

The In'Ax v5 by Athea Mods is a classic Genisis style top-deck mesh wick atomizer, featuring the wick and coil located surrounding the central positive post for uni-directional operation.


In German: GENIal SImpler Sibdampfer, meaning "ingeniously simple mesh steamer".

For all users familiar with mesh Genesis atomizers, the In'Ax series of atomizers by Athea Mods is a household name, continually advancing this classic style of vaping. Genisis style vaping on stainless steel mesh wicks is a highly coveted skill, as it offers some of the cleanest and purist taste, completely unaltered by lack of cotton or other materials as the wick.

New to the In'Ax V5, is a ceramic sleeve that surrounds the positive post, allowing for larger wick diameters that enable faster wicking and cleaner flavour while insulating the mesh wick away from any metal components to minimize hot spots and short circuits.

Airflow is also now increased even further than all previous versions of the In'Ax series, allowing users to perform a rather airy slightly restricted direct lung inhale, but can also close it down all the way to a single 1.2mm MTL air intake hole. Each hole aperture can also be opened and closed infinitely to perfectly fine tune the air draw as desired.

Heatsink fin designed top cap helps to minimize heat retention by increasing the surface area of the cap for faster cooling in high wattage chain vaping sessions. For further insulation, the included Ultem airflow ring can be used to further reflect heat away from the top cap. Otherwise, the installed surgical grade 316L stainless steel airflow ring works fine for most applications.


  • Diameter: 22mm
  • Height: 34.5mm (without drip tip and 510 connection)
  • Tank Capacity: 3 mL
  • Adjustable Air Intake Sizes: 5 positions, from 1.2mm hole, to large 8mm x 2mm oval hole
  • Ceramic insulators
  • 316 L Stainless Steel (surgical grade) construction
  • Two friction-fit drip tips included: White Teflon (PTFE) with 5.0mm inner bore diameter, and a shorter/wider black Delrin (Acetal) with 6.5mm inner bore diameter.
  • Standard 510 drip tip compatible with most drip tips, but ensure the connection is not too long (single o-ring ideally), nor too narrow, as it may contact the top of the center post screw at the top of the post.

Package Contents:

  • 1x In'Ax v5 atomizer
  • 1x PC1000 tank section window
  • 1x SS316L tank section for maximum durability (but no visibility of liquid)
  • 2x Central post
  • 2x Clamping screws
  • 2x Insulating ceramic set
  • 1x SS316L airflow ring
  • 1x Ultem airflow ring
  • 1x PTFE (Teflon) friction-fit drip tip
  • 1x Black Delrin friction-fit drip tip
  • 2x Spare fill plug
  • 1x Spare large o-ring
  • 1x Spare small o-ring
  • 1x Allen key

WARNING: It is highly recommend that you fully clean out this product before the first time you use it. While the factory does a decent job at removing dust, shavings, machining lubricants and greases, there is still the potential for trace elements to remain, and it is best recommended that you do an additional cleaning to meet your standard of cleanliness.

DISCLAIMER: Rebuildable atomizers are for experienced vapers with access to meters and a working knowledge of Ohms Law, Watts Law, battery safety, and how general electricity works. Please ensure care is taken as to not cause damage nor harm to the atomizer, your battery, the vaping device, yourself, others, or personal property.

DISCLAIMER: Polycarbonate components are prone to cracking when exposed to aggressive liquids such as (but are not all inclusive of this list) cinnamon, banana, menthol, anise, licorice, and citrus based liquids. While this product is made from PC1000, a high grade polycarbonate that is more resistant to aggressive liquids, there is no guarantee it can resist cracking against such liquids, and Vapes by Enushi will not provide any type of warranty against damage from these types of liquids.

Vapes by Enushi is not responsible for misuse of product, or dangerously low coil builds. Vapes by Enushi is not liable for the use of improper batteries for your builds.

 Product Videos

In'Ax v5 by Athea Mods (ENG)
  • In'Ax v5 by Athea Mods (ENG)
    Klaus Jedelsky recommends In'Ax v5 by Athea Mods If you want...
  • Tuto IN'AX V5

 Find Similar Products by Tag

Athea  Atomizer  AX  Genesis  in  Mesh  Mods  Rebuildable  RTA  Tank  v5  

 Find Similar Products by Category

Vendors Other Products

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

What's News


Follow us on

Copyright 2020 Vapes by Enushi. All Rights Reserved.
Sitemap | Bigcommerce Premium Themes by PSDCenter

Click the button below to add the Athea Mods - "In'Ax v5" Batch 2, Genesis RTA to your wish list.