dotLeaf V1.5 by dotmod

Power at the palm of your hand

The dotLeaf offers and out-of-this-world dry herb vaping experience that can heat material up to 245°C (473°F) with boost, so you won't be restricted to how hot you want your herb to vape.

The dotLeaf does not use conventional combustion heating, limiting the amount of air pollution, tar, and carcinogens emitted into your home and environment.

Fully compatible with all standard >>510 Drip Tips<<, as well as all >>dotAIO Door Panel Sets<<!

dotLeaf v1.5 Updates

This v1.5 revision includes a few usability upgrades, including:

• Laser engraving on the body for quick tips and reminders
• Updated firmware to combat any temperature irregularities
• New PBT Chamber for better heat resistance
• New o-ring provides a stronger seal with less chance of degradation

Note: Due to the completely different dotChip 2.0 used in the dotLeaf, it cannot be used as a replacement for the dotmod dotAIO, and as such, you cannot use the dotAIO tank chambers, dotAIO coils, nor the dotAIO RBA's in the dotLeaf. The dotLeaf can only be used with the >>dotLeaf Heating Chamber<< due to the constant power output applied to the coil, even when the button is not pressed.

Small size, big punch

With the dotLeaf's easy to remove and open PBT-encased ceramic chamber, cleaning and refilling the chamber is incredibly easy. The dotLeaf has 4 heat presets along with a short boost mode to get the right temperature for your dry herb of choice. The dotLeaf also has a protection mechanism where if the chip reaches 75°C, the light will blink 5 times and power down automatically to allow the device electronics to cool down.

Powered by a single >>18650 battery<< (not included), the dotLeaf is designed for maximum battery life.

Efficiency

The heating chamber module consists of a ceramic core chamber to house your material to be vaporized, which is then housed within an Ultem (PEI) enclosure. With the high heat reflectivity properties of Ultem, the majority of heat produced by the heating element is reflected back inwards towards the ceramic chamber, resulting in efficient usage of the expended energy, and minimized heating of the mod itself.

Multiple possibilities

Not only does the dotLeaf work as a standalone device, but you can also use the dotLeaf with your favourite water pipe. Included in the kit is a 14mm and 18mm adapter so you can get a better experience from the dotLeaf.

dotChip 2.0

The new dotChip 2.0 makes vaping incredibly simple with just a few clicks of a button. Main functions include:

• Temperature Adjust: 4 preset temperatures available
• Overheat Protection: Device powers down if chip temperatures exceed 75°C
• Boost Mode: Increase preset temperatures during session for warmer output

Need a boost?

Looking for a little boost during your session? Hold the fire button down during your session, and the dotLeaf will give you a 15°C power boost for a more powerful hit.

Environmentally Sound

The dotLeaf is designed with the environment in mind, and is constructed from high quality aluminum to lessen the amount of plastic waste generated.

Includes:

• 1x dotLeaf V1.5
• 1x Dry herb tank
• 1x POM (Delrin) mouth piece
• 1x POM (Delrin) 14mm adapter
• 1x POM (Delrin) 18mm adapter
• 1x Multi-tool
• 1x Brush
• 1x Type-C charging cable
• 1x Service pack