SS316 electroplated metal parts, coloured gold using 18k true gold. Gold yellow with tints of red. Plated components are the Chimney, the Negative Post (Deck), the Positive Post, and the AFC Ring, while the rest of the components have a natural CNC look.
Please Note: Due to the nature of electroplating, it is expected to find small marks and iridescent effect on certain points of component INNER surfaces. Steps of the procedure ensure that outer surfaces of the components have uniform look and finish, but inner surfaces can not be processed as effectively equally.
Electroplating is not a coating. Rather, it is a very thin metal layer added on top. As such, hair-like scratches and small bumps, typical on metal surfaces, should be expected on all plated surfaces, visible from close distance or with the use of a magnifying lens.
As an electroplating attribute, tonic differences are expected in the same colour between batches. Differences are not visible with bare eyes in the case of Midnight Black and Gold, and appear to be more intense with the Iron Grey finish. For this, Atmizoo keeps stock of parts from different batches separately, in order to ensure that replacements will come from the same batch with the device when they are needed.
To read more about the DotShell's electroplating process, click >>HERE<<.
Based on the VapeShell RBA for the Billet Box, the DotShell inherits many of the great features from the VapeShell and takes a huge step forward for the dotmod dotAIO! The DotShell introduces all features of RTA's to the world of AIO devices, bringing the already successful dotAIO to another level.
The DotShell utilizes the top part of the dotAIO's stock reservoir, incorporating an adaptation of the dotAIO RBA's AFC system, while offering a large build deck with real-time access potential and further customizable air flow options under the coil. The deck is able to host many different single-coil builds, from simple round wire to large exotic coils, while retaining high liquid capacity in the tank (a bit more than dotmod's RBA).
The air flow is adjusted via an AFC base section with high accuracy which dials in the air hole under the coil from zero to either 3.8mm diameter (stock positive tube) or 2.0mm diameter (spare positive tube).
The optional purchase of MTL Air Flow Pins Kit allows a true MTL experience, extra precise, and with no need of AFC Ring adjustment. Like the VapeShell, these MTL pins further customizes the air flow for a proper and true MTL setup.
All of these features comes together to make the DotShell versatile and perfect for a wide range of vaping profiles, from MTL to DTL.
Add to the above dotmod's auxiliary 510 base for testing, rebuilding, dry-burning, or other purposes, and you will have a complete package.
Before using the DotShell for the first time, it is strongly recommended that you take a good look at Atmizoo's Support Section, with tons of useful info about DotShell, including detailed introduction, assembly/disassembly guides, useful tips, and more.
DotShell comes with a fair and generous warranty from Atmizoo, which covers all manufacturing defects.
WARNING: It is highly recommend that you fully clean out this product before the first time you use it. While the factory does a decent job at removing dust, shavings, machining lubricants and greases, there is still the potential for trace elements to remain, and it is best recommended that you do an additional cleaning to meet your standard of cleanliness.
DISCLAIMER: Rebuildable atomizers are for experienced vapers with access to meters and a working knowledge of Ohms Law, Watts Law, battery safety, and how general electricity works. Please ensure care is taken as to not cause damage nor harm to the atomizer, your battery, the vaping device, yourself, others, or personal property.
Vapes by Enushi is not responsible for misuse of product, or dangerously low coil builds. Vapes by Enushi is not liable for the use of improper batteries for your builds.
This product hasn't received any reviews yet. Be the first to review this product!
All prices are in CAD