null
Categories

YellowKiss (The Vape) - "Pico" RTA

Brand :

(No reviews yet) Write a Review

DISCONTINUED

The Pico RTA by YellowKiss (The Vape)

The Pico by YellowKiss (The Vape) in Korea, is an exclusive rebuildable tank atomizer that is designed for some of the most incredible flavour reproduction available from any tank on the market today, packaged in an incredibly small size!

An adjustable air flow control ring allows users to adjust air draw to make it tighter for a mouth-to-lung style draw, or looser that can allow a slightly restricted lung hit.

All insulators and isolators are made of PEEK thermoplastics to prevent melting at high heat.

The chamber and chimney included with the kit are also made of PEEK thermoplastic to prevent heat from transferring to the liquid, thus, resisting spoilage (darkening) of the stored liquid.

The PMMA (acrylic) tank holds up to 3ml of liquid. Beware of using citrus, cinnamon, menthol, banana, licorice, etc liquids in the acrylic tank, as these flavourings can cause this type of plastic to crack.

An easy to build two post deck with bottom fed air allows for great flavour. Wicking is easily done by running the wick to the sides of the chamber, leading outside of the chamber.

Standard 510 drip tips (none are included) can fit on to this tank.

Kit Comes With:

  • 1x Pico atomizer (tank top cap, PMMA tank, PEEK chimney, PEEK chimney o-ring, PEEK standard chamber, 2x coil lead screws, positive block, center screw/510 pin, deck base, PEEK positive block isolator, PEEK deck base insulator, and PEEK 510 insulator).
  • 1x Spare chimney o-ring
  • 1x Spare base to tank o-ring
  • 1x Spare AFC o-ring
  • 1x Spare coil lead screw

Optional Accessories:

(click item name to see product page)

  • PMMA Drip Tip - Acrylic drip tip, made by YellowKiss. Standard 510 connection. Clear white finish, just like the standard PMMA tank.
  • PMMA Tank - Replacement acrylic tank. Replaces the standard tank in case of damage or wear.
  • PEEK Micro Chamber - For increased flavour compression.
  • Ultem Micro Chamber - For increased flavour compression, replacing the regular chamber, but made of Ultem.
  • Ultem Regular Chamber - Replacement part, made of Ultem.
  • Ultem Chimney - Replacement part, made of Ultem.
  • Ultem Tank - Replacement part, made of Ultem.
  • CLR Gender - A conversion adaptor to allow users to replace the standard build deck, and allows users to use the Joyetech eGo One CLR coil (REBUILDABLE VERSION). Using the eGo One CLR coil allows for slightly increased juice capacity (3.5 ml total), plus a full stainless steel internal look, and increased air flow (if using the 0.5 Ohm CLR coil). Treat as either a disposable coil system, or as a rebuildable.

Ultem is a name brand form of PEI (polyetherimide) resin, which is a high performance thermoplastic that is stiffer than PEEK, with a unique translucent yellow colour.

WARNING: It is highly recommend that you fully clean out this product before the first time you use it. While the factory does a decent job at removing dust, shavings, machining lubricants and greases, there is still the potential for trace elements to remain, and it is best recommended that you do an additional cleaning to meet your standard of cleanliness.

DISCLAIMER: Rebuildable atomizers are for experienced vapers with access to meters and a working knowledge of Ohms Law, Watts Law, battery safety, and how general electricity works. Please ensure care is taken as to not cause damage nor harm to the atomizer, your battery, the vaping device, yourself, others, or personal property.

Vapes by Enushi is not responsible for misuse of product, or dangerously low coil builds. Vapes by Enushi is not liable for the use of improper batteries for your builds.