Loading... Please wait...

Categories

Vapes by Enushi - "Enushi Edition 911 x Armor 2.0 Collab"

Hover over image to zoom

  • Vapes by Enushi - "Enushi Edition 911 x Armor 2.0 Collab". Shown with optional wide bore drip tip for demonstration purposes.
  • Vapes by Enushi - "Enushi Edition 911 x Armor 2.0 Collab". Shown with optional wide bore drip tip for demonstration purposes.
  • Vapes by Enushi - "Enushi Edition 911 x Armor 2.0 Collab"
  • Vapes by Enushi - "Enushi Edition 911 x Armor 2.0 Collab"
  • Vapes by Enushi - "Enushi Edition 911 x Armor 2.0 Collab"
Vapes by Enushi
USD$498.74
Weight:
1.10 KGS

 Product Description

Enushi Edition 911 x Armor 2.0 Collab by Vapes by Enushi

This Enushi Edition 911 x Armor 2.0 Collab is an international collaboration of form and function between Infinity Mods of Italy providing the 911 mechanical bottom feed mod, and Armor Mods of Malaysia providing the Armor 2.0 RDA rebuildable dripping atomizer, all customized and tied together by Vapes by Enushi in Canada.

Limited to only 30 pieces in existence, this set has been custom refinished to create a harmonious integration of the atomizer in the colour way and textures.

Clean and subtle lines in a dull black finish are accentuated by punchy polished gold plated accents.

The final result is a classy, ultra compact, light weight, yet incredibly hard hitting setup that yields fantastic vapour production and flavour.

Also included with this set, is a DESCE Neo Mini Enushi Edition neoprene sleeve, to carry and protect your setup. Black neoprene case with subdued black "DESCE" logo on one side, and gold Vapes by Enushi logo on the other.

I'M 911EE by Infinity Mods x Vapes by Enushi

The I'M 911EE (Enushi Edition) by Infinity Mods features the Vapes by Enushi "Enucci" logo pattern chemically etched then plated in 24 karat gold to the brass battery door insert. The I'M 911 logo insert and 911 button insert are also 24K gold plated brass, making this a truly unique iteration of the I'M 911 with its striking polished gold on dull black colour way.

Solid 925 silver electrical contacts fitted to the interior of the 911EE make this mechnical mod an incredibly hard hitting performer with minimal voltage drop. All power conduction from the battery to the atomizer are solid silver, with the exception of a solid brass contact block that bridges the positive trigger plate to the silver 510 center feeder pin. The use of this contact block minimizes power arcing and pitting of the silver feeder pin while shortening the trigger throw dramatically.

An 8.5mL silicone Cappy R Medium bottle is included, providing durability, ease of use, and fast draining when over squonking.

The 510 connector pad is stainless steel for thread durability. The center pin of the connector is a solid 925 silver manually adjustable telescopic screw, which provides the most stable connection, ensuring strong and powerful hits with minimal voltage drop during electrical conduction under load.

A fire button lock is attached to the 510 connector, allowing the user to prevent accidental firing during transport. However, due to the extremely compact size of the 911, it is difficult to reach this lock when the battery is inserted. It is intended for the user to remove the battery, lock the switch, then the battery can be inserted back into the mod for safe transport with minimized risk of accidental firing.

Made of SLS 3D printed nylon, the ultra compact design of the 911's body is light weight yet strong, with a matte grippy feel to it, and velvety to the touch.

911EE Specifications:

  • Battery: Single 18650 High Drain IMR Lithium Battery
  • Weight (empty bottle, without battery): 52.4 grams
  • Height: 73mm
  • Width: 40.5mm
  • Depth: 24mm
  • Body Material: SLS 3D printed nylon
  • Exterior Metal Material: Gold plated brass
  • Contact Material: Solid 925 Silver, with brass trigger contact block
  • 510 Connector Material: Stainless steel
  • 510 Center Pin: Manually adjustable telecopic screw pin
  • Fire Button Lock: Yes, accessible with battery removed
  • Bottle Capacity: 8.5mL Cappy R by Infinity Mods x SunBox Mods, smoked grey colour

Armor 2.0EE by Armor Mods x Vapes by Enushi

The Armor 2.0EE (Enushi Edition) by Armor Mods features custom media blasted black Delrin AFC Ring, AFC Lock, and Beauty Ring, giving the atomizer a subdued look that matches the 911EE included in this package, while minimizing heat transfer to the user's lips. The stainless steel cap is further customized by receiving a fine polish and plated in 24 karat gold to give it a subtle flair to reflect the colour way of the 911EE mod.

Capable of building with single coil builds or dual coil builds, the Armor 2.0 RDA has quickly taken hold as a staple within the collection of high end device users. Featuring great aesthetics, tons of customization options, easy-to-build deck, deep reservoir, and easy squonking, it is easy to see why the Armor 2.0 is so well liked once you taste the incredible flavour this little atomizer puts out, thanks to its incredibly small and compact evaporation chamber.

A PEEK Single Coil Reducer is included with the Armor 2.0, further compressing the dead space in the chamber when operating in single coil mode, for maximum flavour production. The cap must be installed a certain way to interface with the locking lugs on the base. This lug system limits how far the cap can rotate on the base. Turn the cap fully clockwise till it stops, for usage in single coil mode, or turn the cap 90 degrees counter-clockwise till it stops, for usage in dual coil mode.

If building for single coil usage, do note which side of the deck opens up to the single air hole intake. Insert the SCR in to the opposite side of the reservoir.

The drip tip included in this package is the smaller of the drip tips shown in the photos. The black Delrin wide bore drip tip shown in some of these photos is an optional purchase that can be added to your order via the drip down list.

A media blasted black Delrin 24mm to 22mm Beauty Ring is included to merge the 22mm Armor 2.0 atomizer to the 911 mod, while also having the practical benefit of catching liquid spillage.

Armor 2.0EE Specifications:

  • Weight: 19.7 grams (including beauty ring and PEEK SCR installed, but without build installed)
  • Rebuildable: Yes
  • Single Coil Build: Yes
  • Dual Coil Build: Yes
  • Bottom Feed: Yes, BF pin is installed
  • Standard Dripping: Yes, solid pin is included
  • Adjustable Airflow: Yes, for single or dual coil focus, infinitely adjustable from fully closed to wide open for maximum lung hit.
  • Diameter: 22mm
  • Beauty Ring Outer Diameter: 24mm

Full Package Includes:

  • Neo Mini Enushi Edition neoprene sleeve by DESCE
  • I'M 911EE (Enushi Edition) by Infinity Mods x Vapes by Enushi
  • 8.5mL Cappy R smoked black silicone bottle, black silicone cap, and smoked silicone hose by Infinity Mods x SunBox Mods
  • I'M Battery Wrap by Infinity Mods
  • I'M Velvet Pouch by Infinity Mods
  • Armor 2.0 Deck by Armor Mods
  • Armor 2.0EE Gold Cap by Armor Mods x Vapes by Enushi
  • Armor 2.0EE Media Blasted Black Delrin AFC Ring by Armor Mods x Vapes by Enushi
  • Armor 2.0EE Media Blasted Black Delrin AFC Lock Ring by Armor Mods x Vapes by Enushi
  • Armor 2.0 Regular Bore Drip Tip by Armor Mods
  • Enushi Edition Beauty Ring, media blasted black Delrin by Armor Mods x Vapes by Enushi
  • Armor 2.0 BF Pin by Armor Mods
  • Armor 2.0 Solid Pin (for standard dripping) by Armor Mods
  • Armor 2.0 spare screws and o-rings

Optional Accessories:

Usage Note: This package arrives with 100% pure vegetable glycerine applied to the media blasted black Delrin Armor components to give it a rich black look. It has NOT been used before. We purposely apply the vegetable glycerine so that the complete package looks rich and black when you first receive it. When washed and dried, media blasted black Delrin tends to look like a dull grey colour. The re-application of 100% VG to these parts will recondition it back to a rich and lustrous black look, or through normal usage, VG from vapour production and condensation will settle on to these parts to keep it looking rich and black.

Note: This product is finished in small batches, piece-by-piece by hand, and as a result, slight imperfections may appear from set to set, making each set unique. Manufacturer's warranty does not cover the finish of this product.

WARNING: It is highly recommend that you fully clean out this product before the first time you use it. While the factory does a decent job at removing dust, shavings, machining lubricants and greases, there is still the potential for trace elements to remain, and it is best recommended that you do an additional cleaning to meet your standard of cleanliness.

DISCLAIMER: Rebuildable atomizers and mechanical mods are for experienced vapers with access to meters and a working knowledge of Ohms Law, Watts Law, battery safety, and how general electricity works. Please ensure care is taken as to not cause damage nor harm to the atomizer, your battery, the vaping device, yourself, others, or personal property.

Vapes by Enushi is not responsible for misuse of product, or dangerously low coil builds. Vapes by Enushi is not liable for the use of improper batteries for your builds.

 Find Similar Products by Tag

2.0  armor  armour  by  Edition  Enushi  I'M  IM  Infinity  Kit  Mods  package  set  V2  Vapes  

 Find Similar Products by Category

Vendors Other Products

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

newsletter

Follow us on

Copyright 2018 Vapes by Enushi. All Rights Reserved.
Sitemap | Bigcommerce Premium Themes by PSDCenter

Click the button below to add the Vapes by Enushi - "Enushi Edition 911 x Armor 2.0 Collab" to your wish list.