High tech German engineering at its finest, the Dicodes Dani Extreme V3 is a temperature controlled regulated mod, featuring a spring loaded 510 connection for a flush atomizer fit when mounted. Available in silver stainless steel or black chrome finish. The silver stainless steel version is available in three different lengths, which can also accept extension cap accessories (sold separately) to allow resizing for different batteries.
The Dani Extreme V3 is a powerful, compact 22mm tube mod with clean lines and sexy looks that delivers a high quality, smooth, flavorful vape experience. It offers 5 different modes, allowing the user to switch between variable wattage, variable wattage with heat protection, variable wattage with power boost, variable temperature (various wire types supported), and a bypass mode which turns the device into an unregulated protected Mod.
This single button device is packed with so many features and adjustments, that the initial learning curve can be a bit daunting due to the level of complexity and number of adjustments available. Once you’re beyond the learning curve, the navigation and settings become second nature. *Please take some time to read and understand the short instruction manual packaged with the device. We also recommend you download the complete manual for more detailed instructions and features explanation. (See the PDF attachment below for the full manual.)
Can be configured to accept 18350, 18490, 18500, and 18650 batteries. Buy the smallest length version for the smallest battery you will use. Extension to larger batteries will require the purchase of an extended battery cap to allow fitment of larger cells. Find these extension caps >>HERE<<.
If using the 18500 tube, the most highly recommended battery, is the AW 18490 cell, with 1200mAh capacity and an 18A continuous discharge rating. The AW 18490 can be purchased >>HERE<<.
The Dicodes Dani Extreme V3 is precision machined in Germany and backed by a two year warranty on the electronics
Dicodes, there is no substitute! Why settle for anything less!
Two year warranty covers manufacturing faults within the electronic component of the device only. Opening the device, other than the battery cap to change the battery, will void the warranty.
Please Note: In order for the temperature control settings to function, a coil made from NiFe30, Titanium, Ni200, Tungsten, adjustable ("other“) wire must be used, no exceptions. Coils made with Standard Nichrome or Kanthal A1 wire will only support wattage mode, so the temperature control feature cannot be utilized.
This product hasn't received any reviews yet. Be the first to review this product!
All prices are in USD