B2K RSA TRVP x CAVIAR by BB Vapes Brvnd
- 45 Degree chamfered edge cap which protects excessive wear on the o-rings.
- 23mm outer diameter, 20mm height (without drip tip).
- Two post 45 degree angled indirect airflow design. Air collides under the coil to allow more air on wire surface and provides a smooth vaping experience.
- Heat resistant white Delrin, black Delrin, stainless steel, and Ultem caps included.
- 21mm heat fin with six milled out holes on cap for extra heat dissipation.
- Inner concaved caps for maximum flavour production.
- Stop taps integrated in the caps for easy RDA removal from mod.
- 510/810 drip tip design - Goon/Kennedy/810 drip tip compatible caps.
- Shorty 5mm height wide bore 810 tip with threads to use optional removable stainless steel "splash guard" disk.
- 510 drip tips with 6mm inner bore for easy "dripping" when in non-squonk mode.
- Sleek designed 810/510 drip tip adapter.
- CNC engraved serial number.
- Positive PEEK insulator.
- Base of deck with integrated o-ring to protect mod from scratches and prevents liquid from leaving in/out of 510 connector.
- Milled juice reservoir to allow more juice to absorb into wick when squonking or dripping.
- Integrated coil guide groove.
- Dual 45 degree angled 2mm x 6mm adjustable airflow. Side/bottom air current design for maximum flavour and smooth draw.
- Non reduced 316 stainless steel single coil postless build deck to maximize real estate.
- 1mm airflow ring cuts airflow in half vertically).
- Stainless steel bottom feed center pin and regular pin included.
- Stainless steel hex grub screws.
- Integrated spare grub screw storage on side post.
- 1mm protruding positive 510 pin will work on mechanical hybrid mods, but not recommended.
- 510 connection.
- Ultem, clear, black, and white beauty rings (4.5mm x 24mm)
All parts are interchangeable with B2K V1 and KRNK Edition.
- One complete B2K RSA set
- Spare parts
- Bottom feed pin
- Regular dripping pin
- Black Delrin cap
- White Delrin cap
- Stainless steel cap
- Ultem cap
- Stainless steel 810 splash guard disc
- 510 tips
- 810 tips
- Ultem beauty rings
- Clear beauty ring
- Black Delrin beauty ring
- White Delrin beauty ring
B2K works great with single "exotic" coils such as fused clapton, alien, staggarton, etc. 0.15 to 0.5 ohm resistance coils at 30 to 70W of power. Feel free to experiment with many types of builds, including round wires. This RSA (Rebuildable Squonking Atomizer) has lots of room and caters to a wide variety of vaping styles.
Tip: Pack more wicking cotton to reduce chamber space for a warmer vape and even more flavour, especially when using higher resistance builds.
DESIGNED IN CANADA
Change List (from KRNK Edition):
- Flat head screws changed to hex screws
- Clear cap replaced with stainless steel cap
- Coil guide added to deck
- Deck material upgraded from 304SS to food grade 316SS
- 810 tips now shorter, at 5mm height from 6mm.
WARNING: It is highly recommend that you fully clean out this product before the first time you use it. While the factory does a decent job at removing dust, shavings, machining lubricants and greases, there is still the potential for trace elements to remain, and it is best recommended that you do an additional cleaning to meet your standard of cleanliness.
DISCLAIMER: Rebuildable atomizers are for experienced vapers with access to meters and a working knowledge of Ohms Law, Watts Law, battery safety, and how general electricity works. Please ensure care is taken as to not cause damage nor harm to the atomizer, your battery, the vaping device, yourself, others, or personal property.
Vapes by Enushi is not responsible for misuse of product, or dangerously low coil builds. Vapes by Enushi is not liable for the use of improper batteries for your builds.