Loading... Please wait...

Currency Displayed in

Categories

Aeronaut Vape - "Aeronaut" RDA

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
Aeronaut Vape
USD$70.98
Weight:
0.10 KGS

 Product Description

Aeronaut RDA by Aeronaut Vape

Now available with a gun metal black cap as well!

Designed by an aerospace engineer, the Aeronaut RDA is definitely one of a kind. Time has been spent into overcoming the problems many other RDAs have such as leakage, spit-back, conductivity, poor coil leg connections and small juice capacities. Meanwhile, more options become available thanks to the independent airflow module/tube design of the Aeronaut RDA. Builders now have the possibility of customizing airflow configurations without altering the airflow design permanently.

The Aeronaut's build deck uses clamping plates to connect coil legs to the posts. This allows the device to accommodate a large variety of wire gauges and a huge variety of build type configurations that you can throw at it. Combined with a 10mm juice well for huge liquid capacity in a truly leak free design, the engineering and thought put into this product truly makes it a builders RDA.

The Aeronaut RDA comes with spare tubes that can be used for blocking out either top or bottom airflow. If you block out the bottom airflow, it performs like a top airflow atty with higher leak resistance; if you block out the top, it becomes a bottom airflow atty and the tube in the cap acts like a spit-back guard. If both the top and bottom air flow are opened, then the device can operate in competition mode.

Bottom airflow can be adjusted by turning the top cap. If the bottom air flow is closed completely, then the device becomes a top airflow atty again.

Note: When building your coils make sure there is enough space between the top tube and the coil to prevent arcing.

Features:

  • 22mm Diameter
  • 316 + 304 Stainless Steel Construction
  • Replaceable AFC tubes
  • Clamping Connection
  • Leak Resistant Design
  • 10mm Juice Well
  • Milled-in Negative Post
  • Adjustable Center Pin (For safety, please adjust before use)
  • Comes with blocker tubes, spare o-rings, spare screws, and spare clamping plates

WARNING: It is highly recommend that you fully clean out this product before the first time you use it. While the factory does a decent job at removing dust, shavings, machining lubricants and greases, there is still the potential for trace elements to remain, and it is best recommended that you do an additional cleaning to meet your standard of cleanliness.

 Product Videos

The Aeronaut RDA is My New Favorite RDA of All Time!
  • The Aeronaut RDA is My New Favorite RDA of All Time!
    If I gush too much in this review, I apologize. I do my very b...

 Find Similar Products by Tag

 Find Similar Products by Category

Vendors Other Products

 Product Reviews

  1. My favorite!

    Posted by Therese on 2017 Jul 25th

    This is my favorite RDA when it comes to flavors. Would have given it 5 ☆ if it had squonk pin. Recommended


  2. Awesome Dripper!!!

    Posted by Amiee B on 2017 Jan 31st

    Shipping was fast, the pricing was reasonable and the customer service was well on point. The dripper itself is absolutely amazing!! the airflow bars are so unique! it's great being able to adjust it without messing with the deck. the clones airflow tubes are fixed and the well isn't as deep. With the authentic, you can adjust freaking everything, airflow is amazing and the DEEP well makes dripping freaking amazing. I probably get close to 8 solid puffs before I even have to think about adding juice. Flavor is amazing since that cotton stays so wet. the only negative I can comment about is when you pull the top off to add juice there tends to be a good bit of juice getting pushed down to the bottom of the deck. it's a little messy in that respect but nothing compared to some other drippers I've used. I 've had a bit of trouble finding the best type of coil for the Aeronaut. I've never messed around with alien wire or caterpillar coils but I picked up some prebuilt caterpillar and had a hell of a time getting it in there. I eventually got it to fit but because it's stapled, the more you bend it the less stable it is. I ended up having to scrap it and am moving on to alien wire cause I think it will be easier to work with. if you don't want to spend the money then pick up the clone, but if you want the versatility of some sick builds then get the authentic, you won't be disappointed.


  3. an authentic RDA

    Posted by Ryan Disano on 2016 Feb 15th

    Being an authentic RDA it better darn well get 5 stars, or rather it should. No disappointment with this one. Excellent machining, looks a dream to setup. Havent had a chance yet but everything about this dripper screams quality. Cant wait to vape on it!


You Recently Viewed...

newsletter

Follow us on

Copyright 2017 Vapes by Enushi. All Rights Reserved.
Sitemap | Bigcommerce Premium Themes by PSDCenter

Click the button below to add the Aeronaut Vape - "Aeronaut" RDA to your wish list.